Fujitsu FI-486PRRE Introduction, About this manual

INTRODUCTION

Thank you for purchasing the fi-486PRRE Imprinter. The fi-486PRRE is the fi-4860C image scanner option.

The fi-486PRFR and the fi-486PRRE can be installed in the fi-4860C image scanner together.However, they cannot be used at a time.Either fi-486PRRE or fi-486PRFR can be used during scanning.

ATTENTION

The fi-486PRRE installation should be done by a trained service engi- neer.

fi-486PRRE

The fi-486PRRE prints on the front side of documents.

Printing is done prior to scanning a document and the printed characters are scanned and included in the scanned image.

About this manual

The contents of this manual are as follows.

1. PREPARATIONS

This chapter explains the contents of the imprinter package and the part names.

2. BASIC OPERATIONS

This chapter describes how to use the imprinters.

3. DAILY CARE

This chapter describes how to clean the imprinter and the related area of the scanner.

4. REPLACING PRINT CARTRIDGE

This chapter explains how to replace the Print cartridge and reset the Ink remain counter.

5. PRECAUTION

This chapter explains important details for ensuring the correct use of the products.

i