CHAPTER 2 Removal and Replacement Procedure
2.1Spare Parts
2.2Disk Drive Removal
This chapter explains the procedure for removing and replacing the disk drive. It is assumed that the reader has a thorough knowledge of replacing the complete disk drive and replacing the
When carrying out these procedures, note the following items.
•
•
•
•
Be sure to wear a wrist strap when removing the disk drive from the host system.
The disk drive must have been removed from the host system.
A
Mounting is done by reversing the steps for removal.
To carry out maintenance properly, observe the following:
•
•
•
•
•
Place removed screws and other parts where they will not get lost or damaged.
Keep a record of all maintenance work.
Tighten screws securely but not excessively.
Before touching the PCA, wear a wrist strap and check it is grounded to discharge any static electricity from your body. This ensures that the worker will not electrically damage the PCA.
Do not push the DE cover under any circumstances.