Fujitsu MHV2040BS, MHV2080BS, MHV2060BS manual Data corruption

Page 20

Maintenance and Diagnosis

Data corruption

When asking for repair, save all data stored in the disk drive beforehand. Fujitsu Limited is not responsible for any loss of data during service and repair.

(5)Notes on handling

a.General notes

a)Vibrations and shocks more severe than allowed will cause fatal damage to the device so be very careful. Be especially careful when unpacking the device.

b)Do not leave the device in a dusty environment.

c)Because the device uses MR (MR head) and static sensitive CMOS semiconductors take the following precautions, be careful of the handling on the following points after the device is unpacked.

Use an antistatic mat, etc. in the environment for handling the equipment. The worker should also be physically grounded (e.g., wearing a wrist strap).

Hold by the DE section, do not directly touch the PCA unit unnecessarily.

b.Unpacking

a)Use a flat workplace, find which side of the pack is up and be careful not to have the wrong side facing upwards. Do not place the device directly on a hard table, place it on something soft such as a rubber mat.

b)Be careful not to apply any excessive force to the packed device when removing the shock absorbing material.

c)When taking the device out of the antistatic bag, be especially careful not to apply any excessive force to the PCA or to the interface connector section.

d)Never ever remove the DE seal label and screws and the DE cover.

c.Installation

a)When the power is ON, do not change the switch setting, or connecting, or disconnecting connectors.

b)Do not move the device or disconnect connectors with the power ON or until the disk drive unit comes to a complete stop after the power is turned OFF. (It is required to wait more than 30 seconds.)

d.Packaging

a)Place the device in an antistatic vinyl bag along with a desiccant (silica gel).

1-4

C141-F075

Image 20
Contents Disk Drives Maintenance Manual MHV2080BS, MHV2060BS, MHV2040BSFor Safe Operation Handling of This ManualRevision History This page is intentionally left blank Conventions for Alert Messages PrefaceOverview of Manual Operating Environment Hot PlugLiability Exception This page is intentionally left blank Static, Damage Important Alert ItemsImportant Alert Messages Device damage Data corruptionDamage or Device damage This page is intentionally left blank MHV2040BS Disk Drives Maintenance Manual Manual OrganizationThis page is intentionally left blank Contents Illustrations TablesMaintenance and Diagnosis Maintenance Rules for maintenanceMaintenance requirements Data corruption Maintenance levels Storage Store in dampproof packagingDisk drive revision number Disk drive revision number labelDisplay of disk drive revision number Test Self-diagnosticsTools and test equipment Test flowchart Status Field contents Disposition for Error Field contentsOperation test Diagnostic testOperation Confirmation Troubleshooting disk drive replaced in field Troubleshooting ProcedureTroubleshooting procedure System level and field troubleshooting MHV2040BS Disk Drives Product ManualTroubleshooting at factory Removal and Replacement Procedure Model and parts numbers Spare PartsDisk Drive Removal Acronyms and Abbreviations CSSAcronyms and Abbreviations Index Index READER’S Comment Form This page is intentionally left blank C141-F075-01EN This page is intentionally left blank

MHV2040BS, MHV2060BS, MHV2080BS specifications

Fujitsu's MHV series of hard disk drives, including the MHV2040BS, MHV2060BS, and MHV2080BS, are designed for high-performance applications in various computing environments. These models feature a 2.5-inch form factor, making them suitable for both laptop and desktop systems, where space and efficiency are crucial.

The MHV2040BS, with a capacity of 40GB, provides an ideal solution for users requiring dependable storage for basic computing tasks. The MHV2060BS boosts the capacity to 60GB, accommodating users who require additional space for multimedia files and applications. For those needing significant storage, the MHV2080BS comes in at 80GB, catering to heavier workloads and larger datasets.

All three models utilize a robust 5400 RPM spindle speed, offering a balance between performance and energy efficiency. The drives are equipped with an Ultra ATA/100 interface, enabling high data transfer rates for smoother operation and faster file access. This interface is particularly beneficial for users operating in environments with demanding I/O operations.

In terms of technologies, the MHV series integrates advanced features aimed at enhancing data integrity and performance. The drives utilize Fluid Dynamic Bearings (FDB) that minimize mechanical noise and vibration, resulting in quieter operation and increased reliability over time. Additionally, these models are designed to withstand higher shock levels, making them resilient in mobile applications or environments where durability is paramount.

The MHV series is optimized for lower power consumption, ensuring that users can enjoy longer battery life in portable devices while maintaining system performance. With a mean time between failures (MTBF) rating that exceeds 600,000 hours, Fujitsu emphasizes the longevity and reliability of the MHV2040BS, MHV2060BS, and MHV2080BS drives.

Ultimately, the Fujitsu MHV series represents a blend of innovation and practicality. With their robust build quality, commendable performance characteristics, and energy-saving features, they cater to a wide range of storage needs, from everyday computing to more demanding applications, making them a suitable choice for both personal and business environments.