Fujitsu LQFP-64P operation manual Preface, Handling and usage

PREFACE

Thank you for purchasing the LQFP-64P*1header type 2 (MB2198-304) for the DSU-FR emulator. This product is used together with the BGA-660P adapter for the DSU-FR emulator (MB2198- 300)*2 to connect the DSU-FR emulator (MB2198-01)*3and DSU-FR cable (MB2198-10)*4to a user system that uses a MB91460 series Fujitsu FR*4 microcontroller (LQFP-64P)*5.

This manual describes how to use the LQFP-64P header type 2 for the DSU-FR emulator. Please read the manual carefully before using. Please contact your Fujitsu sales or support representative for de- tails on which production and evaluation MCU models can be used with this product.

*1 : The lead pitch of package (FPT-64P-M23) is 0.65mm and the body size is 14mm ⋅ 14mm.

*2 : Referred to as the “adapter”

*3 : Referred to as the “emulator”

*4 : Referred to as the “DSU cable”

*5 : FR is an abbreviation of FUJITSU RISC CONTROLLER and is a product of Fujitsu Limited.

■Handling and usage

The handling and use of this product and notes regarding safety use are included in the hardware manual of the DSU-FR family emulator.

Follow the instructions in for the use of this product.

•DSU-FR EMULATOR MB2198-01 HARDWARE MANUAL

•DSU-FR EMULATOR DSU-FR CABLE MB2198-10 OPERATION MANUAL

•DSU-FR EMULATOR BGA-660P ADAPTER MB2198-300 OPERATION MANUAL

■Caution of the products described in this manual

The following precautions apply to the product described in this manual.

CAUTION

The wrong use of a device will give an injury and may cause malfunction on cus- tomers system.

Cuts	This product has parts with sharp points that are exposed. Do not touch edge of
	the product with your bare hands. There is a possibility that it may be injured.
	When connect the header board to the user system, correctly position the index
Damage	mark (▲) on the NQPACK mounted on the user system with the index mark (▲)
	on the header board, otherwise the emulator system and user system might be
	damaged.
Damage	When mounting a mass production MCU, correctly position pin 1, otherwise the
	mass production MCU and user system might be damaged.

i