3. Notes on Designing
■Notes on designing the printed circuit board for the user system
If the header board is connected to a user system, the heights of parts mounted around the header board are restricted.
When designing the printed circuit board of the user system, consider the heights of components within the range of the header board, as shown in Figure 1, so that the components mounted on the user system do not interfere with the header board.
88.0mm
52.0mm
42.0mm | 150.0mm |
|
| Adapter | 23.0mm | |
|
|
| ||
| Header | Insulating plate |
| |
| Approx. |
| ||
|
|
| ||
User | 1.6mm | 17.0mm* | 10.0mm | |
Approx. | ||||
system |
|
| ||
|
| 13.0mm* |
| |
| NQPACK064SB |
|
|
*: The height differs slightly depending on how the sockets are engaged.
Figure 1 Header board dimensions
2