2.2 Connection to Main Unit
2.2Connection to Main Unit
As shown in Figure
■Connection to Main Unit
As shown in Figure
For details of connecting the IF cable to the main unit, refer to the 2140 Main Unit MB2141 Emulator User’s Manual.
■Notes
When connecting the parallel communications adapter to the main unit (sold separately), keep the following points in mind:
•Turn off the power before connecting or removing a cable. Attempting to connect or remove a cable while the power is turned on may cause a malfunction.
•To remove a cable, do not pull the cable itself; grasp and pull the connector. Pulling the cable itself may cause a conductor inside the cable to break.
13