The WinZip files contain
2* Currently there are no COPE V5.4C manuals available in English.
The following additional documentation is also recommended:
BS2000 Performance Handbook
SM2 User Guide (for COSMOS as of OSD V2.0)
COSMOS Descriptions
2 Technical information
New and extended software functions are described in chapter 3.
2.1Resource requirements
Approximately 12000 PAM pages are required for installation. The file SINLIB.COPE.054 (approximately 6000 PAM pages) can be deleted after installation. During evaluation of COSMOS measurement files, work files are created which can be 500 to 5000 PAM pages in size depending on the number of events and tasks to be evaluated.
COSMOS evaluations require a high level of calculation time, depending on the measurements to be evaluated.
Hardware
Siemens System 7.500
9750,9755 terminals and others
User address space: approximately 24 MB
2.2 Software configuration
The following software is required for running the product:
FHS as of V8.0
TOM.DOC text module
2.3Product installation
2* All files required for running COPE V5.4C and the procedures required for installation are supplied in a single LMS library named:
SINLIB.COPE.054.
The installation procedure provided in this library is "COP54.INST" and can be called as follows:
/DO SINLIB.COPE.054(COP54.INST)
If an older COPE version already exists under this ID, it can generally be overwritten as COPE V5.4C includes all functions of older COPE versions.
Once the installation procedure has executed, all COPE files should be available under the selected ID.