Fujitsu BS2000 manual Cpu

3.Software extensions

The following extensions and enhancements are implemented over the previous version COPE 5.3A:

-Hardware master data updating (new CPUs, disks) The following new hardware can be modeled:

CPU	: S110-x,	S115-x, S135-xxx
1*	S150-xxx,	S160-xxx
	S140-xxx,	S170-xxx
2*	SR2000-Bx
	SR2000-Cx, SX130-xxx, S120-xxx
3*	SX100-Ax/Bx, SX140-xxx, S145-xxx, S180-xxx
4*	S190-xxx , S155-xxx
5*	SX150-xxx (all 9 Typs )
Disk	: D34251-21/41, MP47, MP97
2*	FP38
5*	DMX1000, DMX2000, DMX3000

net controller: HNC 91850 and 91851

-Modelling the SR2000 Systems

The release V5.4 supports the following specific functions of the SR2000-Ax/-Bx systems:

. Utilization and number of needed SINIX-Prozessors for the Input/Output workload of BUS peripheral devices

. Utilization and number of needed Controller (DCS2/HIOS)

and multibusbridges (MBP) for the Input/output workload of BUS peripheral devices

-Improved modeling of I/O subsystems with cache

From a COSMOS measurement the cache hit ratio is build for the model. Different actions are created for read and write access. On this base it's very simple to change the hit ratio for the model.

COPE calculate the access time for the I/O with included the data format (K2,NK4), channel type and the raid level.

1* - Modeling Transaktion in seperate TYPE of a Group 1*

1* .From a COSMOS measurement the resource requirements is build

1* for each Transaktion of a UTM-TAC. The output of the COPE

1* cosmos monitor can be used for evaluation purposes. The list

1* contines the monitoring values gathered for each TAC.

1*

2* .The utility COPV54.CSMODTA is now obsolete. Create model

2* with TACs to a TYPE is now integreated as function in

2* COPE.

-6-