INOVA GigaCHAMPION™
VIDEO CARD
Use the included 1.5m length of USB A-B cable to connect the PCs external USB to the GigaCHAMPION face-plate. Ensure that the bank of switches on SW1 are correctly set - Switch 2 ‘ON’ is the default setting and configures the remotely connected display as the boot monitor.
6
DISPLAY CABLE | 15-PIN D-DUB | 9-PIN D-DUB |
| TO LOCAL VGA | TO GigaHUB |
Now replace the PCI board fixing screw and the computer cover.
The Inova GigaCHAMPION has a local analog VGA connector and one high-speed serial GigaST)R interface (9-pin D-Sub). Connect a local VGA monitor (if required) to the video output and the 20+m length of twisted-pair cable that links the GigaHUB to the GigaCHAMPION to the remaining D-Sub connector. Finally, you are ready to attach the power cord and proceed with the software installation of the supplied Inova driver.
Doc. PD008310103.001 | ©2002 Inova Computers GmbH | Page1-5 |
