Getting Started | GigaPACK |
|
|
1.2Software Installation
1.20Microsoft Windows®XP or Windows®2000
New hardware will be detected after you restart your computer. To complete the setup you must click ‘Yes’ when prompted to restart the computer.
1.21 Windows®XP or Windows®2000 Driver
With Windows®XP or Windows®2000 running on your computer, you need to install the Inova driver to take advantage of the higher performance, resolutions and the special graphic features afforded by the GigaCHAMPION.
Windows will recognise that a new piece of hardware has been found and will automatically launch the New Hardware Wizard.
1.) Acknowledge this by clicking ‘Next’ when prompted to do so.
2.) Choose ‘Search for a suitable driver for my device (recommended)’ and click ‘Next’
3.) Under ‘Optional Search Locations’ make sure that only
4.) Insert the Inova installation CD that shipped with the product and click ‘Next’
5.) Windows will tell you that it found a driver for this device - click ‘Next’ to install it
6.) A screen may appear that says ‘Digital Signature Not Found’ and ask if you want to continue
7.) Click ‘Yes’
8.) The files will be copied
9.) Once prompted, click ‘Finish’
ATI is a registered trademark of ATI Technologies Inc. Canada, the United States and/or other countries. RADEON is a trademark of ATI Technologies Inc. Canada, the United States and/or other countries. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. All other trademarks and/or registered trademarks are the properties of their respective owners.
© Copyright 2002, Inova Computers GmbH
©2002 Inova Computers GmbH Doc. PD008310103.001 |