Server OS Windows 2000 Advanced or NT Client OS Microsoft

Connecting to a Microsoft Windows 2000 Advanced or NT 4.0 Server

Microsoft Windows 2000 Professional

Requirements

Operating System	Windows 2000 Professional

Driver Version	5.22.03.0050 (Embedded in OS)

Driver File	IBMTRP.SYS

Server OS	Windows 2000 Advanced or NT 4.0
	Server

Client OS	Microsoft

Procedure

1.With the HP Vectra turned off, install the network adapter into an available PCI slot.

2.Connect the network cable to the newly installed network adapter.

3.Connect the WOL cable between the network adapter and the PC motherboard.

4.Power on the machine and boot to Windows.

5.Logon to Windows with administrator privileges.

6.Windows will silently detect (i.e. without any messages or prompts) the network adapter as “IBM 16/4 Token-Ring PCI Adapter 2 with Wake on LAN” during start up and automatically install its embedded driver.

7.From the Device Manager, under Network adapters, double-click on “IBM 16/4 Token-Ring PCI Adapter 2 with Wake on LAN” to open its Properties window. Click on the “Power Management” tab and check “Allow this device to bring the computer out of standby”.

8.Additional changes in the System or Local Area Connection properties, such as: workgroup name, computer name, TCP/IP properties, etc. may be necessary. Ask your Network Administrator for more information. After changes are made, a restart may be necessary.

Known Problems

Problem1

When the system wakes up from standby, the monitor does not turn back on. As a workaround the problem, after the computer wakes up from Standby, move the mouse or press a key on the keyboard to get a display from the monitor.