IBM WL2 manual Microsoft Windows 98 2nd edition Requirements

Page 8

Connecting to a Novell NetWare 5.1 or 4.11 Server

Microsoft Windows 98 2nd edition

Requirements

Operating System

Windows 98 2nd edition

 

 

Driver Version

5.33.00.0050

 

 

Driver File

IBMTRP5.SYS

 

 

Server OS

NetWare 5.1 or 4.11 Server

 

 

Client OS

Client v3.30 for Windows 95/98

 

 

Procedure

1.With the HP Vectra turned off, install the network adapter into an available PCI slot.

2.Connect the network cable to the newly installed network adapter.

3.Connect the WOL cable between the network adapter and the PC motherboard.

4.Power on the machine and boot to Windows.

5.Windows will detect the network adapter as “IBM PCI Token-Ring Adapter, NDIS4”.

6.Insert the driver disk and click on “Next” to continue the installation.

7.Accept the default selection: “Search for the best driver for your device (Recommended).” and click “Next”.

8.Select the locations Windows will search for drivers. Accept the default selection: “Floppy disk drives” and click “Next”.

9.Accept “The updated driver (Recommended)…” by clicking on “Next”.

10.Click on “Next” to install the driver.

11.Click on “Finish” when the driver installation is complete.

12.Remove the driver disk and click on “Yes” when prompted to restart the system.

13.Additional changes in the Network properties, such as: workgroup name, computer name, TCP/IP properties, etc. may be necessary. Ask your Network Administrator for more information. After changes are made, a restart will be necessary.

14.From the location of the “Novell Client v3.30 for Windows 95/98” installation files, execute “Setup.exe”.

Image 8
Contents IBM PCI WL2 Page Read This First Procedure Microsoft Windows NT 4.0 Workstation RequirementsPage Server OS Windows 2000 Advanced or NT Client OS Microsoft Page Microsoft Windows 98 2nd edition Requirements Known Problems Problem1 Server OS Windows 2000 Advanced or NT Client OS Microsoft Known Problems Problem1 Microsoft Windows 2000 Professional Requirements Click on Reboot once the installation is complete Server OS Windows 2000 Advanced or NT Client OS Microsoft