CHAPTER 4: Operation
4.11 Sleep Timer
The sleep timer turns the TV off after a period of time. Program the time through the Wakeup/Sleep dialog box in the Configure menu. There are two ways to enable or disable the sleep timer:
a. Use the Sleep button on the remote. Pressing once enables the function. Pressing a second time disables it.
b.Use the S key on the keyboard to
enable or disable the function.
4.11.1WAKE UP FUNCTION
The wake up function switches to a specific channel at a predefined time. If the TV is iconized or the power is turned off, wakeup will switch on the TV. The time is programmed through the Wakeup/Sleep dialog box invoked via the Configure menu. The function can be enabled via a check box in the Wakeup/Sleep dialog box. This dialog box can also be invoked using the W key.
4.12 Clock Display
The current time can optionally be displayed at the bottom right corner of the TV screen. There are two ways to enable or disable it:
a. Use the Clock button on the remote control.
b.Use the Clock display choice in the floating menu or the Configure menu.
c. Use the D key on the keyboard to turn clock display on or off.
4.13 Selecting the Audio Source
There are three audio sources that can be selected:
•The tuner
•An external source from a laser disk or VCR
•An internal source, which could be a sound board or
The tuner source is selected by default. The CD or sound board can be selected with a CD button on the remote. Pressing this button once switches the audio to the CD source and brings up a program to control the
The audio source can also be selected through the Audio dialog box. The audio dialog box can be invoked through the Audio option of the floating menu or the Configure menu on the menu bar. It can also be changed by typing A through the keyboard.
17