Hubbell Type AR, Type D7, Type D6 warranty Overhead Switches

Page 1

®

POWER SYSTEMS, INC.

®

14A-

OVERHEAD SWITCHES

Gang-Operated

Type AR, Type D7 and Type D6

Warranty - Material

The Chance Company warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be free from defects in material and workmanship. Buyer must notify the Company promptly of any claim under this warranty. The Buyer's exclusive remedy for breach of this warranty shall be the repair or replacement, F.O.B. factory, at the Company's option, of any product defective under the warranty which is returned to the Company within one year from the date of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR ARISING BY OPERATION OF LAW, COURSE OF DEALING, USAGE OF TRADE OR OTHERWISE IMPLIED, SHALL EXIST IN CONNECTION WITH THE COMPANY'S PRODUCTS OR ANY SALE OR USE THEREOF. The Company shall in no event be liable for any loss of profits or any consequential or special damages incurred by Buyer. The Company's warranty shall run only to the first Buyer of a product from the Company, from the Company's distributor, or from an original equipment manufacturer reselling the Company's product, and is non-assignable and non-transferable and shall be of no force and effect if asserted by any person other than such first Buyer. This warranty applies only to the use of the product as intended by Seller and does not cover any misapplication or misuse of said product.

Warranty - Application

The Chance Company does not warrant the accuracy of and results from product or system performance recommendations resulting from any engineering analysis or study. This applies regardless of whether a charge is made for the recommendation, or if it is provided free of charge.

Responsibility for selection of the proper product or application rests solely with the purchaser. In the event of errors or inaccuracies determined to be caused by The Chance Company, its liability will be limited to the re-performance of any such analysis or study.

NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice.

©Copyright 2007 Hubbell Incorporated  •  210 North Allen Street  •  Centralia, MO 65240 USA

 

HUBBELL / CHANCE COMPANY – CENTRALIA, MISSOURI

Printed in USA

SEPTEMBER 2007

Image 1
Contents Overhead Switches Variations and Configurations Type AR Switch Ratings541,717 6,818,846 6,946,607 14.4kV, 25kV or 34.5kV 900 Amperes Continuous/Interrupt14A-3 Available Options Single Phase of Type AR SwitchHorizontal Mounting Vertical Mounting Side View Phase-over-Phase Mounting aDelta Mounting Inverted Mounting Replacement Parts Option Tables by ConfigurationPatents 6,207,919 215,082 6,281,460Horizontal Mounting Phase-over-Phase Riser Pole Mounting Type D7 Switches - UnitizedConvenient Installation 15 to 38 kV AmperesThru 34.5 kV Switch Base and Bearings Design FeaturesInterrupters Terminal Pads, Arcing Horns15 to 38 kV Amperes Riser Pole Mounting 15 to 38 kV 600 Amperes Horizontal Mounting 15 to 38 kV Amperes Phase-over-Phase Mounting 34.5 kV 150kV LIW* Switch Phase Outline 27kV 150kV LIW* Switch Phase OutlineOptions 38 kV 600 Amperes 38 kV 200 LIW* Switch Phase OutlineSupport RatingsBases and Bearings Type D6 Switches - Non-UnitizedBlade Opening Terminal Pads, Arcing HornHorizontal Mounting 38 kV - 200 kV LIW For alternate mounting configurations, see precedingControls 14A-19 Mail hpsliterature@hps.hubbell.com