IBM 802.11B manual Installing the device driver in Windows XP

8. Cover the Mini-PCI Card with the insulation sheet		, and attach the
Mini-PCI guide	that comes with the option package.

9.Align the tabs of the Mini-PCI Card slot cover with the corresponding slots; then press the cover flat.

10.Tighten the screws of the cover.

Attention: After you install a Mini-PCI Card, do not use your computer until you have closed the cover. Never use the computer with the cover open.

11.Reinstall the battery. (For information on reinstalling the battery, refer to the ThinkPad T30 Series Service and Troubleshooting Guide.)

12.Turn the computer over again. Connect the ac adapter and cables to the computer; then turn it on.

Installing the device driver

If your computer is a wireless upgradable model, and you are installing the Mini-PCI Card for the first time, you need to install the device driver for the Card. To install the driver, refer to the following instructions.

Note: If you are using ThinkPad X30 Series computer, attach the X3 UltraBase™ and then install a CD drive in the Ultrabay™ Plus, or attach a USB CD drive to the USB connector.

Installing the device driver in Windows XP

To install the device driver in Microsoft® Windows® XP, do the following:

1.Turn off the computer, and then install the Mini-PCI Card, using instructions given in “Installing the Mini-PCI Card” on page 1-2.

2.Turn on the computer.

1-10Cisco Aironet wireless 802.11b Mini PCI by IBM: User’s Guide