IBM 07N4108 manual Specifications, Warranty Statements

Page 3

Specifications

 

15 GB￿ Drive

20.4 GB Drive

30 GB Drive

 

 

 

 

Performance￿ (all values typical averages):

 

 

 

Read - seek time

8.7 ms

8.7 ms

8.7 ms

Rotational speed

7200 RPM

7200 RPM

7200 RPM

Buffer size

2 MB￿

2 MB￿

2 MB￿

 

 

 

 

Part numbers:

 

 

 

Option part number

19K4460

19K4461

00N8203

Drive part number

07N4108 19K1618

07N4109 19K1619

07N4110 19K1620

Field Replaceable Unit (FRU) part number

19K1564

19K4565

19K1567

 

 

 

 

Logical parameters:

 

 

 

Number of heads

16

16

16

Number of cylinders

16383

16383

16383

Number of sectors per track

63

63

63

LBAs or user sectors per drive

29 336 832

39 876 480

58 600 080

 

 

 

 

Disk transfer (buffer to host):

 

 

 

Burst (Max. MBps)

 

 

 

Ultra DMA Mode-5 (Ultra ATA/100)￿

100

100

100

Sustained (MBps) (minimum)

18–35

18–35

18–35

 

 

 

 

￿When referring to hard-disk-drive capacity, GB equals approximately 1 000 000 000 bytes and MB equals approximately 1 000 000 bytes; total user-accessible capacity may vary depending on the operating system.

￿Actual performance varies based upon many factors and is often less than the maximum possible. ￿Up to 192 KB reserved for drive firmware.

￿The drive supports all earlier ATA transfer modes.

Product warranties and notices

This section contains the product warranties and electronic emissions notices.

Warranty Statements

The warranty statements consist of two parts: Part 1 and Part 2. Part 1 varies by country. Part 2 is the same for both statements. Be sure to read both the Part 1 that applies to your country and Part 2.

￿United States, Puerto Rico, and Canada (Z125-4753-05 11/97) (Part 1 - General Terms on page 3)

￿Worldwide except Canada, Puerto Rico, Turkey, and United States (Z125-5697-01 11/97) (Part 1 - General Terms on page 5)

￿Worldwide Country-Unique Terms

(Part 2 - Country-Unique Terms on page 7)

IBM Statement of Limited Warranty for United States, Puerto Rico, and Canada (Part 1 - General Terms)

This Statement of Limited Warranty includes Part 1 - General Terms and Part 2 - Country-unique Terms. The terms of Part 2 may replace or modify those of Part 1. The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you purchase for your use, and not for resale, from IBM or your reseller. The term “Machine” means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any combination of them. The term “Machine” does not include any software programs, whether pre-loaded with the Machine, installed subsequently or otherwise. Unless IBM specifies otherwise, the following warranties apply only in the country where you acquire the Machine. Nothing in this Statement of Warranty affects any statutory rights of consumers that cannot be waived or limited by contract. If you have any questions, contact IBM or your reseller.

3

Image 3
Contents Options Troubleshooting Warranty Statements SpecificationsIBM Warranty for Machines Production Status Items Not Covered by Warranty Asia Pacific Part 2 Worldwide Country-Unique TermsFollowing terms apply to the country specified Electronic emissions notices Federal Communications Commission FCC StatementIndustry Canada Class B emission compliance statement European Union emission directive Avis de conformité à la réglementation dIndustrie CanadaUnion Europea Normativa EMC