IBM Computer Monitor manual Management software on

Problem	Possible	Suggested Action	Reference
	Cause
Screen is blank	The monitor is
and power	in the Power	Check the Power	Power Management
indicator is
	Management	Management software on
flashing amber	Suspend or	your computer	section on page 16
every 0.5 or 1
	Off state
second
Screen is blank		Check that the signal
	The monitor is	cable is firmly connected	CONTROLS AND
and power		to the computer.
indicator is	not receiving		CONNECTORS
		Check that no pins are
flashing green	a video signal		Section on page 1
		bent in the signal cable
every 1 second
		connector.
		Select IMAGE LOCK	OPERATING
Image appears		menu in the OSD. Then
			INSTRUCTIONS
to be smeared		select MANUAL to adjust
			Section on page 3
		FINE/COARSE settings.
Image appears	The Color	Adjust the Color settings.	OPERATING
to be discolored	setting may		INSTRUCTIONS
	be incorrect		Section on page 3
		The LCD contains over
		2,300,000 thin film
A few dots are		transistors (TFTs). A small
		number of missing,
missing,		discolored, or lighted dots
discolored, or
		may be present on the
inappropriately
		screen, which is an
lighted.
		intrinsic characteristic of
		the TFT LCD technology
		and is not an LCD defect.

“COARSE” (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture does not have the correct width.

“FINE” adjust the phase of the pixel clock signal. With a wrong phase adjustment the picture has horizontal disturbances in light picture.

For “FINE” and “COARSE” adjustment use a dot pattern or Windows 95/98 /ME/XP/2000 shutdown screen.

12