IBM Computer Monitor manual Packing List, Controls and Connectors, Video Cable

Page 6

Before operating the monitor please read this manual thoroughly. This manual should be retained for future reference.

PACKING LIST

The product package should include the following items:

1.LCD Monitor

2.Setup Guide

3.Power Adapter/Cord

4.User’s Guide CD with installation files

5.Safety/Warranty Booklet

CONTROLS AND CONNECTORS

3

1

2

Figure 1 Connecting Cables

1.Signal Cable

2.External Power Adapter

3.

AC Power Cord

VIDEO CABLE

Connecting the Signal Cable:

The LCD monitor comes with a built-in signal cable. Plug the signal cable′s 15-pin connector into the computer's video port and tighten the two screws on the cable connector. Refer to Appendix for the detail connector pin assignment.

1

Image 6

Contents LCD Monitor Users GuidePage First Edition April Trademarks Table of Contents Packing List Controls and ConnectorsConnecting the Signal Cable Product package should include the following itemsAdjusting the Viewing Angle Power CordPower Source General Instructions ControlsIcon Control Description OSD Lock / Unlock HOW to Adjust a SettingOperation Initial appearance of OSDAdjusting the Picture OSD functionsSelect the Color Mode you find Installing the Windows XP device driver Installing the Windows Me device driverInstalling the Windows 2000 device driver Update DriverInstalling the Windows 98 device driver Installing the Windows 95 device driverHave Disk Select Device window, click Have DiskTroubleshooting Problem Possible Suggested Action Reference CauseManagement software on Specifications IBM 9512-AW*/ AB* TFT Color LCD MonitorConnector PIN Assignment Factory Preset Timing Table Display ModesFactory Set Display Modes Active Off Power ManagementState Power Screen Restoring Compliance Indicator Operation OffDescription Video Color MTMGeography