IBM L191p manual User

Problem	Possible	Suggested Action	Reference
	Cause

Screen is blank	Brightness		User
			controls
and power	and Contrast	Adjust brightness and
			section on
indicator is	may be too	contrast.
			page User
steady green	low
			controls19
		Press any key on the	Power
		keyboard or move the
	The monitor is		Management
		mouse to restore
	in the Power		section on
		operation.
	Management		page Power
		Check the Power
	Standby state		Management2
		Management software on
			7
		your computer
		Check that the signal	Connecting
Screen is blank		cable is firmly connected to
	The monitor is		your Monitor
and power		the computer.
	not receiving		for Analog
indicator is		Check that no pins are
	a video signal		section on
steady amber		bent in the signal cable
			page 7
		connector.
		Press any key on the	Power
	The monitor is	keyboard or move the
			Management
	in the Power	mouse to restore
			section on
	Management	operation.
			page Power
	Suspend or	Check the Power
			Management2
	Off state	Management software on
			7
		your computer.
Screen is blank	Display mode		Further
and power	of the
		Reconfigure the	Information
indicator is	computer is
		computer to use a	section on
Flashing green	outside the
		supported display mode.	page Further
every 0.5	range of the
			Information25
second	monitor
		Select Image Setup	User
Image appears	There are		controls
		menu in the OSD. Then
	noises in the		section on
to be smeared		select MANUAL to adjust
	video signal		page User
		Phase/Clock settings.
			controls19
			User
Image appears	The Color	Adjust the Color	controls
to be	setting may		section on
		settings.
discolored	be incorrect		page User
			controls19

FRANÇAIS ENGLISH

COMPL & WARR JAPANESE ITALIANO ESPAÑOL

29