IBM L170m manual Controls, Select Image Setup

Problem	Possible	Suggested Action	Reference
	Cause
Screen is blank	Brightness		User
and power	and Contrast	Adjust brightness and	controls
indicator is	may be too	contrast.	section on
steady green	low		page 15
		Press any key on the
	The monitor is	keyboard or move the	Power
		mouse to restore
	in the Power		Management
		operation.
	Management		section on
		Check the Power
	Standby state		page 22
		Management software on
		your computer
		Check that the signal	Connecting
	The monitor is	cable is firmly connected to
		the computer.	your Monitor
	not receiving
		Check that no pins are	section on
	a video signal
Screen is blank		bent in the signal cable	page 6
and power		connector.
indicator is
		Press any key on the
blinking green.
	The monitor is	keyboard or move the
			Power
	in the Power	mouse to restore
			Management
	Management	operation.
			section on
	Suspend or	Check the Power
			page 22
	Off state	Management software on
		your computer.
	Display mode		Further
	of the	Reconfigure the
	computer is		Information
		computer to use a
	outside the		section on
		supported display mode.
	range of the		page 20
	monitor
	There are	Select Image Setup	User
Image appears		menu in the OSD. Then	Controls
	noises in the
to be smeared		select MANUAL to adjust	setion on page
	video signal
		Phase/Clock settings.	17
Image appears	The Color		User
		Adjust the Color	Controls
to be	setting may
		settings.	setion on page
discolored	be incorrect
			17

24