4Press the >?//buttons to adjust the settings.
ForPress
ROTATION /. . . to rotate the picture clockwise
?. . . to rotate the picture counterclockwise
Customizing Your Monitor
Using the ZOOM On-screen Display
The ZOOM settings allow you to enlarge or reduce the picture.
Once the setting is adjusted, it will be stored in memory for the current input signal.
1 Press the | button. |
The MENU OSD appears.
PINCUSHION /. . . to expand the picture sides
?. . . to contract the picture sides
PIN BALANCE /. . . to move the picture sides to the right
?. . . to move the picture sides to the left
KEYSTONE /. . . to increase the picture width at the
top
?. . . to decrease the picture width at the top
KEY BALANCE /. . . to move the top of the picture to
the right
?. . . to move the top of the picture to the left
2Press the ¬./>and >?//buttons to select “ 
ZOOM,” and press the 
button again.
The ZOOM OSD appears.
ZOOM
H 
26
V 
73
3Press the >?//buttons to adjust the picture zoom.
/. . . to enlarge the picture
?. . . to reduce the picture
The OSD automatically disappears after about 30 seconds. To close the OSD, press the 
button again.
To reset, press the ? (reset) button while the OSD is on.
Note
The picture zoom adjustment will stop as soon as either the horizontal or vertical size reaches its maximum or minimum value.
EN
F
ES
C
The OSD automatically disappears after about 30 seconds. To close the OSD, press the 
button again.
To reset, press the ? (reset) button while the OSD is on. The selected item is reset to the factory setting.
7