Customizing Your Monitor
Changing the | Locking the controls |
You can change the OSD position (for example, when you want to adjust the picture behind the OSD).
1 Press the | button. |
The MENU OSD appears.
2Press the ¬./>and >?//buttons to select “ 
OPTION,” and press the 
button again.
The OPTION OSD appears.
OPTION
ON
MANUAL DEGAUSS
3Press the ¬./>buttons to select “ 
(OSD H
POSITION)” or “ 
(OSD V POSITION).”
Select “ 
(OSD H POSITION)” to adjust the horizontal position.
OPTION
OSD H POSITION
Select “ 
(OSD V POSITION)” to adjust the vertical position.
OPTION
OSD V POSITION
4Press the >?//buttons to move the OSD to the desired position.
The OPTION OSD automatically disappears after about 30 seconds.
To close the OSD, press the 
button again.
To reset, press the ? (reset) button while the OSD is on.
The control lock function disables all of the buttons on the front panel except the u (power) switch and button.
1 Press the button. The MENU OSD appears.
2Press the ¬./>and >?//buttons to select “ 
OPTION,” and press the 
button again.
The OPTION OSD appears.
OPTION
ON
MANUAL DEGAUSS
3Press the ¬./>buttons to select “ 
(CONTROL
LOCK).”
OPTION
OFF ON
CONTROL LOCK
4Press the >?//buttons to select “ON.”
The OPTION OSD automatically disappears after about 30 seconds.
To close the OSD, press the 
button again.
Once you select “ON,” you cannot select any items except “EXIT” and “ 
OPTION” in the MENU OSD.
If you press any button other than the u (power) switch and
button, the 
mark appears on the screen.
To cancel the control lock
Repeat steps 1 through 3 above and press the >?// buttons to select “OFF.”
EN
F
ES
C
11