IBM T 55A manual Power Management

Page 26

Power Management

If your computer has previously been used with a

CRT monitor and is currently configured to a display mode outside the range that the Flat Panel monitor can display, you may need to re-attach the CRT monitor temporarily until you have re- configured the computer, preferably to 1024 x 768 at 60Hz.

To benefit from power management, the monitor must be used in conjunction with a computer that implements the Video Electronics Standards Association (VESA) Display Power Management Signalling (DPMS) Standard.

The power management feature is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below.

As an ENERGY STAR®Partner, IBM has determined that this product meets the ENERGY STAR®guidelines for energy efficiency.

IBM recommends that you switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.

State

Power

Screen

Restoring

Compliance

Indicator

Operation

 

 

 

 

 

 

 

 

 

 

 

 

 

On

Steady green

Normal

 

 

 

 

 

 

 

DPMS

Steady amber

Blank

Press a key or

ENERGY STAR®

Standby

move the mouse.

and NUTEK

 

 

 

 

 

 

 

 

Flashing

 

 

ENERGY STAR®

DPMS

amber

Blank

Press a key or

Suspend

(0.5 sec.

move the mouse. ‡

and NUTEK

 

 

interval)

 

 

 

 

 

 

 

 

 

Flashing

 

 

ENERGY STAR®

DPMS Off

amber

Blank

Press a key or

(1 sec.

move the mouse. ‡

and NUTEK

 

 

 

interval)

 

 

 

 

 

 

 

 

‡ There may be a slight delay before the picture reappears.

20

Image 26
Contents T55A Page Gefahrenhinweis Gevaar Perigo Vaara Contents Workplace Preparation SetupHardware Requirements Working PracticesBack Screen settingsHandling Instructions HandsConnecting your Monitor Switching on your MonitorViewing Angle Adjusting the Monitor PositionCaring for your Monitor Setup Diskette for Windows 95 or Windows Configuring your MonitorAutomatic Setup Auto Setup for the PC Auto Setup OS/2 onAuto Setup for DOS English Page Auto Setup OS/2 On page 9 and Auto Setup for DOS on Manual Setup User controls Adjusting Your LCD MonitorUser control features OperationOSD Lock / Unlock OSD functions On-screen display OSD controlsInitial appearance of OSD Position Color Factory Set Display Modes Further InformationDisplay modes Power Management Troubleshooting Problem Possible Suggested Action Reference CauseFurther Further Help Removing the stand and cablesPage Français English Compl & Warr Japanese Italiano Español Specifications Vesa DDCCompliances Federal Communications Commission FCC StatementMprii NOM Production Status WarrantyIBM Warranty Warranty Service Extent of Warranty