Chapter 2 Using BIPAC-2AB 2.0
Function
External
Calling
Speed
Dialing
Redial
Pick Up
Make a New Call
Hold/
Retrieve
Disconnect and then Retrieve
Description
To make an external phone call, dial the number as you would with a regular phone system.
To make a call to the other analog port of the ISDN a/b adaptor, you can press:
#
To dial any of the Speed Dialing numbers that you have programmed in, use the following command:
* 5 ID
where ID is a number from 1 to 4.
Example: If the 4th speed dialing number is 5551113, the following combination:
* 54
dials a call with the number 5551113.
To redial a number, use the following command:
* 01
To answer an incoming call that is designated to the other analog port, you can press:
*02
To disconnect an active call and then have the
*03
To put an active call on hold, use the following command line:
* #
To retrieve a call that’s been put on hold, press the star key and pound key (* #).
To disconnect an active call and then retrieve a call that has been put on hold, use the following command line:
*0 #
9