Removing and installing components during servicing
Mounting the cover
►Place the cover on its mounting location.
(7x)
1
2
►Fasten the cover with the screws (1).
2
i | To avoid damaging the device, insert the longer screws only into the designated holes. |
►Install the battery (see "Inserting battery").
►Turn the notebook over and place it on a flat surface.
►Reconnect the cables that you disconnected before.
Hard disk
The hard disk is the most important storage medium of your notebook. You can work considerably faster and more efficiently if you copy applications and files from floppy or CDs/DVDs to your hard disk.
When the hard disk is accessed, the drive indicator lights up 
.
Removing the hard disk
►Switch the notebook off and pull the power plug out of the mains socket.
►Close the LCD screen so that it locks into place.
►Disconnect all cables connected to the notebook.
►Turn your notebook over and place it on a stabile, sturdy, flat surface. If necessary, lay an anti- slip cloth on this surface to prevent the notebook from being scratched.
►Remove the battery (see "Removing and installing the battery").
52 |