Cisco Systems WS-X6624-FXS Front Panel Description, Environmental Monitoring, Status LED, Color

Front Panel Description

For detailed information on power management, refer to the Catalyst 6500 Series Switch Software Configuration Guide.

Environmental Monitoring

Environmental monitoring of chassis components provides early warning indications of possible component failure to ensure safe and reliable system operation and avoid network interruptions.

For detailed information on environmental monitoring, refer to the Catalyst 6500 Series Switch Software Configuration Guide.

Front Panel Description

The 24-port FXS analog interface module front panel features are shown in Figure 1 and are described in the following sections.

Figure 1 24-Port FXS Analog Interface Module

WS-X6624-FXS

STATUS	1	4	7	10	13	16	19	22	-1
	2	5	8	11	14	17	20	23	24
	3	6	9	12	15	18	21	24

24 PORT FXS ANALOG STATION

33431

Status LED

When the 24-port FXS analog interface module is powered up, it initializes various hardware components and communicates with the supervisor engine. The Status LED on the module is described in Table 3.

Note For detailed information on the supervisor engine LEDs, refer to the Catalyst 6500 Series Switch Module Installation Guide.

Table 3 24-Port FXS Analog Interface Module Status LED

Color

Off

Red

Description

The module is waiting for the supervisor engine to grant power

The module is not receiving power. Module was powered down due to lack of power (module listed as power-denyin the show module status field)

The line card processor powered up, but is not running

The line card processor detected a fatal error during its diagnostics

Overtemperature condition (major threshold exceeded)

Catalyst 6500 Series 24-Port FXS Analog Interface Module Installation Note

78-10975-02 9