Cisco Systems WS-X6624-FXS Specifications, Link LEDs, RJ-21 Connector, Color Description

Specifications

Table 3 24-Port FXS Analog Interface Module Status LED

Color

Description

Orange	The module is initializing hardware or communicating
	with the supervisor engine
	The supervisor engine has disabled the module
	The supervisor engine has sent a
	SCP_SET_DIAG_FEATURES message indicating that
	the diagnostics have failed
	Overtemperature condition (minor threshold exceeded)
Green	The module is operational; the supervisor engine has
	granted a module online status

Link LEDs

The Link LEDs show port and link status for each of the 24 ports as described in Table 4.

Table 4	24-Port FXS Analog Interface Module Link LEDs
LED		Color	Description
Link		Green	Telephone or fax machine is
			off-hook
		Yellow	Module or port disabled through
			CLI1
		Off	Port not active (connected device
			on-hook) or link is not connected

1. CLI = command-line interface.

RJ-21 Connector

The RJ-21 connector on the module front panel allows you to attach 24 analog phones or fax machines to the system.

Specifications

The 24-port FXS analog interface module physical specifications are listed in Table 5.

Table 5 24-Port FXS Analog Interface Module Specifications

		Specifications	Description
		Environmental conditions
		Operating temperature	32 to 104°F (0 to 40°C)
		Nonoperating temperature	–40 to 167°F (–40 to 75°C)
		Humidity	10 to 90%, noncondensing
	Catalyst 6500 Series 24-Port FXS Analog Interface Module Installation Note
10			78-10975-02