Cisco Systems WS-F6K-MSFC2 manual Installing the Screws

Page 13

Installing the MSFC2

Figure 7 Installing the Screws

SWITCH LOAD

PORT 1

PORT 2

100%

SYSYEMCONSOLE

R

MGM

T

CONSOLE

 

 

PW

 

 

RESET

PORT

 

 

 

 

 

 

 

 

 

 

 

 

,MODE

 

 

 

 

 

CONSOLE

PCMCIA

EJECT

1%

SUPERVISOR 2

63700

Step 7 Install the supervisor engine in the Catalyst 6000 family switch. (Refer to the Catalyst 6000 Family Module Installation Guide for installation instructions.)

Caution The hardware on both supervisor engines in a single chassis must be identical. If you have redundant supervisor engines, you must install an MSFC2 on each supervisor engine.

Step 8 If you are installing an MSFC2 on a redundant supervisor engine, go to Step 3 in the “Preparing the Supervisor Engine” section on page 7 and follow the procedure for removing the supervisor engine.

Step 9 Power up the switch.

Step 10 Depending on the software running on the switch, do one of the following steps to verify the installation:

•Cisco IOS for the Catalyst 6000 Family of Switches product on the supervisor engine and the MSFC2:

Verify that the switch is online. This indicates that the system acknowledges the new module and has brought it online.

•Catalyst supervisor engine software on the supervisor engine and Cisco IOS on the MSFC2:

Enter the show module command to verify that the system acknowledges the new module and has brought it online.

Catalyst 6000 Family Multilayer Switch Feature Card 2 Installation Note

 

78-10605-03

13

 

 

 

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Contents Safety Overview 78-10605-03 Layer 3 Forwarding Features FeaturesEnhanced Services Software Requirements Parts ListRequired Tools Preparing the Supervisor Engine Installation GuidelinesRemoving the Msfc from the Supervisor Engine 1A Flash Simm Location on the Msfc Hold here Installing the MSFC2Male Standoff Location on the Supervisor Engine Seating the MSFC2 on the Supervisor Engine Installing the Screws Obtaining Documentation Related DocumentationDocumentation CD-ROM Obtaining Technical AssistanceCisco.com Cisco TAC Escalation Center Obtaining Technical Assistance

WS-F6K-MSFC2 specifications

Cisco Systems WS-F6K-MSFC2, or Multi-layer Switch Feature Card 2, is an advanced component designed for use in Cisco's Catalyst 6500 series switches. This card serves a critical role in enabling advanced routing capabilities alongside traditional switching functions, making it an essential piece of network infrastructure for enterprise environments.

One of the main features of the WS-F6K-MSFC2 is its support for a wide range of Layer 2 and Layer 3 protocols. This versatility allows organizations to efficiently manage both wired and wireless traffic, ensuring seamless communication across diverse networking environments. The card is designed to enhance the scalability of Cisco Catalyst switches by providing an effective means to handle high volumes of traffic, thereby supporting the growing needs of modern networks.

The WS-F6K-MSFC2 incorporates advanced technologies such as IP routing, Quality of Service (QoS), and Integrated Firewall capabilities. The IP routing feature supports routes and protocols such as OSPF, EIGRP, and BGP, facilitating robust interconnectivity within large networks. With QoS functionality, the card helps prioritize critical applications, ensuring that latency-sensitive traffic like voice and video receives the bandwidth it requires.

Additionally, the WS-F6K-MSFC2 supports Virtual Routing and Forwarding (VRF), which allows multiple virtual routing instances within a single router, thereby optimizing network resources and enhancing security. This technology is particularly beneficial for service providers and organizations that require separate data flow paths for different units.

The card is built with reliability in mind, supporting various redundancy and failover mechanisms, such as Hot Standby Router Protocol (HSRP) and redundancy protocols that ensure continuous operation even in the event of a hardware failure. Furthermore, the WS-F6K-MSFC2 is designed to integrate seamlessly with other Cisco networking components, providing a cohesive approach to network management and security.

In summary, the Cisco WS-F6K-MSFC2 Multi-layer Switch Feature Card 2 stands out due to its robust Layer 2 and Layer 3 functionality, advanced routing protocols, QoS, and redundancy features. It is highly regarded for its ability to enhance the performance and scalability of enterprise networks, making it a preferred choice for organizations looking to ensure efficient, reliable, and secure networking solutions. With its versatile capabilities, the WS-F6K-MSFC2 continues to be a vital asset in the ever-evolving landscape of networking technology.
Top Page Image Contents