Cisco Systems ME 3400 manual Enter an enable secret password, and press Return, Plain text

Page 81

Appendix D Configuring the Switch with the CLI-Based Setup Program

Entering the Initial Configuration Information

 

Step 3

Enter an enable secret password, and press Return.

 

 

The password can be from 1 to 25 alphanumeric characters, can start with a number, is case sensitive,

 

 

allows spaces, but ignores leading spaces. The secret password is encrypted and the enable password is

 

 

in plain text.

 

 

Enter enable secret: secret_password

 

Step 4

Enter an enable password, and press Return.

 

 

Enter enable password: enable_password

 

Step 5

Enter a virtual terminal (Telnet) password, and press Return.

 

 

The password can be from 1 to 25 alphanumeric characters, is case sensitive, allows spaces, but ignores

 

 

leading spaces.

 

 

Enter virtual terminal password: terminal-password

 

Step 6

(Optional) Configure Simple Network Management Protocol (SNMP) by responding to the prompts.

 

 

You can also configure SNMP later through the CLI. To configure SNMP later, enter no.

 

 

Configure SNMP Network Management? [no]: no

 

Step 7

Enter the interface name (physical interface or VLAN name) of the interface that connects to the

 

 

management network, and press Return. For this release, always use vlan1 as that interface.

 

 

Enter interface name used to connect to the

 

 

management network from the above interface summary: vlan1

 

Step 8

Configure the interface by entering the switch IP address and subnet mask and pressing Return. The IP

 

 

address and subnet masks shown below are examples.

 

 

Configuring interface vlan1:

 

 

Configure IP on this interface? [yes]: yes

 

 

IP address for this interface: 10.4.120.106

 

 

Subnet mask for this interface [255.0.0.0]: 255.0.0.0

 

Step 9

Enter Y to configure the switch as the cluster command switch. Enter N to configure it as a member

 

 

switch or as a standalone switch.

 

 

If you enter N, you can configure the switch as a command switch later through the CLI. To configure

 

 

it later, enter no.

 

 

Would you like to enable as a cluster command switch? [yes/no]: no

 

 

You have now completed the initial configuration of the switch, and the switch displays its initial

 

 

configuration. This is an example of output that appears:

 

 

The following configuration command script was created:

 

 

hostname switch1

 

 

enable secret 5 $1$Ulq8$DlA/OiaEbl90WcBPd9cOn1

 

 

enable password enable_password

 

 

line vty 0 15

 

 

password terminal-password

 

 

no snmp-server

 

 

!

 

 

 

 

 

no ip routing

 

 

!

 

 

 

 

 

interface Vlan1

 

 

no shutdown

 

 

ip address 10.4.120.106 255.0.0.0

 

 

!

 

 

 

 

 

interface FastEthernet1/0/1

 

 

Cisco ME 3400 Ethernet Access Switch Hardware Installation Guide

 

 

 

 

 

 

 

OL-7677-04

 

 

D-3

 

 

 

 

 

Page 80 Page 82
Image 81
Page 80 Page 82
Contents Americas Headquarters Page N T E N T S Installing and Removing SFP Modules Speed, Duplex, and Autonegotiation IP Settings D-2 Audience PurposeOrganization Conventions Related Publications OL-7677-04 Switch Models Setting up the SwitchFront Panel Description 1describes the switch modelsCisco ME 3400-24TS AC Ethernet Access Switch Front Panel Cisco ME 3400-24TS AC and DC Switches Front PanelCisco ME 3400G-12CS AC and DC Switches Front Panel Cisco ME 3400-24FS Switch AC Switch Front PanelSystem LED Dual-purpose ports Console port SFP module ports Cisco ME 3400G-2CS Switch Front Panel10/100 Ports Only the Cisco ME-3400-24TS Switches SFP Modules SFP Module PortsSFP Module Patch Cable LEDsSystem LED These illustrations show the location of the System LEDConsole Port LEDs Power Supply LEDs Only Cisco ME 3400G-12CS SwitchesDual-Purpose Port LEDs Console PortCisco ME 3400-24FS Switch Rear Panel Cisco ME 3400-24TS Switch Rear PanelCable lock Ground connector Fan exhaust Exhaust fan Cable lock Ground connectorCisco ME 3400G-12S Switch Rear Panel Power Supply FeaturesCisco ME 3400-2CS Switch Rear Panel Fan exhaust AC power connector Ground connectorCisco ME DC Switch Power Supply Cisco ME AC Switch Power SupplyNetwork Configurations Management OptionsThis section covers these topics Preparing for InstallationSwitch Installation Preparing for Installation 122F 50C Statement Installation Guidelines Cisco ME 3400-24TS SwitchesCisco ME 3400G-12CS Switches Installing the Switch Verifying Switch OperationPowering Off the Switch This section describes these installation proceduresRack-Mounting Removing Screws from the SwitchRack-Mounting Brackets Attaching Brackets to the SwitchAttaching Brackets to 19-Inch Racks 191022 Attaching Brackets for 23-Inch Racks Attaching Brackets for 24-Inch Racks Attaching Brackets for Etsi Racks Phillips machine screws Cable guide and screw Mounting the Switch in a RackAttaching the Brackets to the Switch for Wall-Mounting Wall-MountingPhillips flat-head screws 11 Mounting the Switch on a Wall Mounting the Switch on a WallTable- or Shelf-Mounting Installing and Removing SFP Modules12 SFP Module with a Bale-Clasp Latch Installing SFP ModulesBale clasp Removing SFP ModulesInserting and Removing the SFP Module Patch Cable 17 Connecting to an Ethernet Port Connecting to the 10/100 and 10/100/1000 PortsConnecting to SFP Modules Connecting to Fiber-Optic SFP ModulesLC connector 19 Connecting to a 1000BASE-T SFP Module Connecting to 1000BASE-T SFP Modules20 Connecting to a Dual-Purpose Port Connecting to Dual-Purpose PortsWhere to Go Next Diagnosing Problems Check Switch Post ResultsThis section includes these troubleshooting topics Check Switch Connections Check Switch LEDsBad or Damaged Cable Ethernet and Fiber CablesPort and Interface Settings SFP Module Port IssuesPing the End Device Spanning Tree LoopsCheck Switch Performance How to Clear the Switch IP Address and ConfigurationSpeed, Duplex, and Autonegotiation Autonegotiation and NIC CardsSerial Number Location on the Cisco ME 3400G-2CS Switch Locating the Switch Serial NumberSerial Number Location on the Cisco ME 3400G-2CS Switch Connector Specifications These sections describe the connectors used with the switch10/100 Ports Figure A-1 10/100 Port Pinouts Dual-Purpose Ports Figure A-2 Fiber-Optic SFP Module LC ConnectorSFP Module Cable Specifications Cable and Adapter SpecificationsTwo Twisted-Pair Cable Pinouts Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports Crossover Cable and Adapter PinoutsIdentifying a Crossover Cable Adapter Pinouts TxD RxDRxD TxD Switch Console RJ-45-to-DB-25 Port DTE This appendix lists the switch technical specifications Technical SpecificationsAC Power Requirements Physical Dimensions OL-7677-04 Connecting to DC Power Grounding the Switch Preparing the Ground WireReview these safety warnings before you ground the switch Figure C-1 Stripping the Ground Wire Figure C-3 Torquing Ground-Lug Screws Torque to 15 lbf-inConnecting the Grounding Wire to Earth Ground Telco rack Grounding wireTelco rack Primary power feed Secondary redundant power feed Wiring the DC-Input Power SourceCisco ME 3400-24TS Switches Cisco ME 3400G-12CS SwitchesAll Cisco ME 3400 Switches Figure C-8 Terminal Block Plug Console Figure C-11 Inserting Wires in the Terminal Block Plug Figure C-13 Completed Wiring of Terminal Block Plug OL-7677-04 Starting the Terminal-Emulation Software Accessing the CLI Through the Console PortEntering the Initial Configuration Information IP SettingsCompleting the Setup Program Enter an enable password, and press Return Enter an enable secret password, and press ReturnEnter a virtual terminal Telnet password, and press Return Switch or as a standalone switchThese choices appear Numerics Auto-MDIX Pinouts See also connectors and cables cautionsConnecting outside the building warning Cisco IOS command-line interface CiscoViewConnection procedures Connectors and cables 10/100 ports Console portIN-3 Installing SFP modules 2-17 toConnecting to DC LEDs Running at power on Power Connecting to ACPower on ConnectorsIN-5 Ground connectionIN-6
Related manuals
Manual 10 pages 3.76 Kb

ME 3400 specifications

Cisco Systems ME 3400 Series is a robust family of Ethernet access switches designed specifically for service provider environments. These switches are engineered to deliver excellent performance, reliability, and flexibility, making them ideal for deploying Layer 2 and Layer 3 services to residential and business customers.

One of the prominent features of the ME 3400 series is its support for advanced Ethernet technologies. It provides extensive support for both traditional and modern Ethernet services, including Carrier Ethernet. With features such as Ethernet Operations, Administration, and Maintenance (EOAM), the ME 3400 aids in managing network performance and troubleshooting issues effectively. This capability ensures that service providers can deliver high-quality services and maintain optimal network health.

The ME 3400 series includes various models that support a range of port configurations, enabling scalability and adaptability to different network needs. This includes support for both Fast Ethernet and Gigabit Ethernet interfaces. The switches can accommodate multiple speed configurations, making them versatile for diverse deployment scenarios, from small businesses to large enterprise networks.

Another key characteristic of the ME 3400 is its integrated support for resilient Ethernet technologies, such as EtherChannel, Spanning Tree Protocol (STP), and Rapid Spanning Tree Protocol (RSTP). These technologies enhance redundancy and improve network reliability, crucial for service providers who require minimal downtime and high service availability.

Security is a top priority for service providers, and the ME 3400 series addresses this with extensive security features. It supports VLANs for traffic segmentation, access control lists (ACLs) for traffic filtering, and DHCP snooping to prevent unauthorized access to the network. These security measures ensure that both consumer and enterprise traffic remains isolated and secure.

Additionally, the ME 3400 series supports IPv4 and IPv6 routing, offering flexibility for service providers to cater to a broad customer base. The ability to manage both protocols ensures that networks can evolve seamlessly as internet traffic transitions to IPv6.

With energy efficiency increasingly becoming a concern, Cisco has integrated power-saving features into the ME 3400 series. These switches support Energy Efficient Ethernet (EEE) technology, which reduces power consumption during periods of low traffic, helping service providers to reduce operational costs.

In summary, the Cisco ME 3400 series is a versatile platform rich in features that streamline service delivery while ensuring high performance, security, and energy efficiency. It is an ideal choice for service providers looking to enhance their Ethernet services and meet evolving customer demands.
Top Page Image Contents