Cisco Systems ME 4924-10GE important safety instructions

Regulatory Compliance and Safety Information for the Cisco ME 4924-10GE Ethernet Switch

Read this document before you install or service the Cisco ME 4924-10GE Ethernet switch.

Note Only trained and qualified service personnel (as defined in IEC 60950-1 and AS/NZS 3260) should install, replace, or service the equipment. Install the system in accordance with the U.S. National Electric Code if you are in the United States.

Warning IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

This document includes the following sections:

•Translated Safety Warnings, page 2

•European Directives, page 47

•Regulatory Standards Compliance, page 48

•EMC Environmental Conditions for Products Installed in the European Union, page 50

•EMC Class A Notices and Warnings, page 50

•Related Documentation, page 54

•Obtaining Documentation, page 54

•Documentation Feedback, page 55

•Cisco Product Security Overview, page 55

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

© 2006 Cisco Systems, Inc. All rights reserved.