Configuring Token Ring
TRISL Configuration Examples
IPX Routing
Figure 59 shows IPX routing non-source-routed frames between a TRISL VLAN and a Token Ring interface.
Figure 59 IPX Routing Non-Source-Routed Frames Between a TRISL VLAN and a Token Ring Interface Example
Catalyst 5000 switch
Network 1
Token
Ring 2
Fast Ethernet 4/0.1 TrBRF 999/Bridge 14 Network 10
End station | End station |
5500 
Token Ring 
switch module
Token | TrCRF VLAN 40 |
Ring 1 | Slot 5 |
| Port 1 |
End station | End station |
|
51886
The following is the configuration for the router:
ipx routing
interface TokenRing 3/1 ipx network 1
!
interface fastethernet4/0.1 ipx network 10
encapsulation tr-isl trbrf 999 bridge-num 14
The following is the configuration for the Catalyst 5000 switch with the Token Ring switch module in slot 5. In this configuration, the Token Ring port attached to ring 1 is assigned to the TrCRF VLAN 40.
#vtp
set vtp domain trisl set vtp mode server set vtp v2 enable #drip
set tokenring reduction enable set tokenring
set vlan 999 name trbrf type trbrf bridge 0xe stp ieee
set vlan 40 name trcrf40 type trcrf parent 999 ring 0x1 mode srt #add token port to trcrf 40
set | vlan 40 | 5/1 |
set | trunk 1/2 | on |
|
| Cisco IOS Bridging and IBM Networking Configuration Guide |
|
|
|
|
|
| |||
|
|
|
|
| |
|
|
|
|