Cisco Systems SFS 7024 manual Reboot Window

Chapter

Figure 3-15 Reboot Window

Step 2 Select the radio button of the spine to be rebooted, or select the radio button to reboot the entire hemisphere.

Step 3 Click Reboot.

Rebooting Multiple Managed Spines

In a redundant management configuration it may occasionally be necessary for the user to reboot both managed spines in a hemisphere. This is accomplished through the CLI of the master spine.

Step 1 Access the master spine CLI via Telnet, SSH, or through the SFS 7024 RS232 serial ports. Step 2 The system prompts for a user name. At the prompt enter:

admin

Step 3 The system prompts for a password. At the prompt enter:

adminpass

The system responds with:

Welcome to the SFS 7024 CLI. Type 'list' for the list of commands.

Step 4 To reboot multiple spines on the SFS 7024 enter the following command:

reboot now -m -n

where:

•now initiates the reboot process as soon as the user presses Enter (i.e., no system y/n prompt).

•-mreboots just the management card of the master spine. This is a non-disruptive reboot (i.e., the reboot will not interfere with any switch traffic).

•-nreboots just the management card of the slave spine (in a non-disruptive manner).

Note If accessing the CLI through Telnet or SSH, the user will need to reconnect to the CLI following the reboot.

Cisco SFS 7024 Hardware Users Guide

3-40 OL-8794-02