Cisco Systems OL-6380-01 manual Snmp Access Tab, Cat OS Snmp

Page 9

Chapter 5 Network Element Management

Network Element Management Window

SNMP Access Tab

The following areas are available on the SNMP Access tab of the Network

Element Management window:

IOS/LINUX SNMP

Cat OS SNMP

IOS/LINUX SNMP

The IOS/LINUX SNMP area provides:

SNMP v2c Read Community—The v2c community string used to read data from the agent.

SNMP v2c Write Community—The v2c community string used to write data from the agent.

Last Authentication Failure Address—The IP address of the last host that caused an SNMP authentication failure to occur. This has no value in a pure CatOS installation.

The attributes within this area are inactive for Catalyst OS devices.

Cat OS SNMP

The Cat OS SNMP area provides:

Same As IOS?—If enabled, the IOS SNMP version and communities will be used to access the SNMP Agent on the Supervisor module in Hybrid OS configurations.

If this attribute is set to ‘No’ the SNMP Read Community and SNMP Write Community fields in the Cat OS SNMP area become active.

SNMP v2c Read Community—The v2c community string used to read data from the agent.

SNMP v2c Write Community—The v2c community string used to write data to the agent.

The attributes within this area are inactive for Catalyst OS devices.

 

 

Cisco Catalyst Switch Manager User Guide

 

 

 

 

 

 

OL-6380-01

 

 

5-9

 

 

 

Image 9
Contents Network Element Management Chassis Layer2/Layer3 Management Window Layer 3 Configuration Layer 2 ConfigurationCSM/7600 Manager NE Config/Mgmt ISystem Configuration TabIP Address Operating SystemIOS Session Cat OS Session Reset SystemActions System Information TabCat OS Snmp Snmp Access TabSnmp Trap Tab Trap GenerationSnmp Trap Chassis Management-Configure Snmp Trap Client Window Additional Notes Tab Device Management TabMAC Address Query Window MAC Address Query Window Network ElementMAC Address Query OL-6380-01