Chapter 1 Introduction
Features and Benefits
Software Features
These are the switch software features and the benefits that they provide. You can configure these features through the device manager GUI (see the “Device Manager GUI” section on page
Note For enhanced switch features that are available only through Network Assistant and not through the device manager GUI, see the “Cisco Network Assistant” section on page
Express Setup
•Initial setup only requires IP information for
•Quick IP information updates if you relocate the switch to a different network.
•Date and time settings automatically synchronized between the switch and the network management station.
•Dynamic Host Configuration Protocol (DHCP) automatically assigns the switch an IP address, a default gateway, and a subnet mask from a DHCP server.
Troubleshooting
•General switch diagnostic test detects problems on the switch. Link diagnostic test detects
•General switch and link diagnostic reports describe problems detected on the switch and its ports and list recommended actions to resolve each problem.
Monitoring
•Alert LED notifies that one or more problems were detected on the switch.
•Alert Log lists all problems detected on the switch, including a timestamp of the most recent detection of each problem.
•Graphical front panel display, LEDs, gauges, graphs, and animated indicators show switch and port status, utilization, and error percentages, and temperature and fan status.
•Port status and statistics tables display port operating status and the statistics for data being received and sent on each port.
|
| User Guide for the Catalyst Express 500 Switches |
|
|
|
|
| ||
|
|
| ||
|
|
|