Release Note for the Cisco 11000 Series Secure Content Accelerator: SCA/SCA2
This release note applies to the Cisco 11000 Series Secure Content Accelerator, SCA and SCA2 versions. The note supplements information found in the Cisco 11000 Series Secure Content Accelerator Configuration Guide distributed with version 4.1 of the firmware. The SCA2 offers significantly higher performance than the other SCA device.
The Cisco 11000 Series Secure Content Accelerator is compatible with all Cisco content
The following sections are presented in this note:
•CD Contents
•Reflashing the Firmware
•Operational Notes
CD Contents
The
•Flash image
•Electronic versions of this document and the Cisco 11000 Series Secure Content Accelerator Configuration Guide
Reflashing the Firmware
The fw directory contains the firmware image of the SCA2. Use the following instructions to reflash the firmware on the device. Please read the entire document before proceeding with the flash procedure.
Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA
Copyright © 2002. Cisco Systems, Inc. All rights reserved. |