Chapter 3
Configuration
Network Type This is the network type used by your wireless network.
Radio Band This is the radio band used by your wireless network.
Security This is the status of the wireless security feature.
MAC Address This is the MAC address of the wireless network’s access point.
Refresh Click Refresh to perform a new search for wireless devices.
Connect To connect to one of the networks on the list, select the wireless network, and click Connect. If the network’s wireless security is enabled, then one of these wireless security screens appears:
WEP
If the network has WEP encryption enabled, then you see the WEP Key Needed for Connection screen. Select the appropriate level of WEP encryption,
WEP Security
WPA
If the network has the WPA Personal security enabled, then you see the WPA Personal Needed for Connection screen. Select the appropriate encryption type, TKIP or AES. Enter the network’s
WPA2 Personal
If the network hasWPA2 Personal wireless security enabled, then you will see the WPA2 Personal Needed for Connection screen. Enter the network’s Passphrase or
WPA2 Personal Security
Profiles
The Profiles screen lets you save different configuration profiles for different network setups. The table on the left displays a list of available profiles with their profile names and wireless network names.
8 |