Cisco Systems SPA2102 manual How to Access the Web-based Utility, Voice

Page 32

Phone Adapter with Router

Voice

•Info. This screen displays voice-related status information about the Phone Adapter.

•System. Use this screen to configure the user password.

•User 1. Use this screen to configure call forward, speed dial, supplementary service, and ring settings for the primary Internet phone line.

•User 2. Use this screen to configure call forward, speed dial, supplementary service, and ring settings for the secondary Internet phone line.

How to Access the Web-based Utility

To access the Web-based Utility of the Phone Adapter, launch the web browser on the PC connected to the Phone Adapter’s Ethernet port. If the Phone Adapter uses its default address, then enter 192.168.0.1 in the Address field. If you have assigned a static IP address to the Phone Adapter, then enter <IP address of the Phone Adapter> in the Address field. Press the Enter key.

If your Internet Telephony Service Provider (ITSP) did not supply a password, you will not see a login screen. If your ITSP supplied a password, then you will see a login screen. In the User Name field, enter user, the default user name for user access. (This cannot be changed.) Then enter the password supplied by your ITSP.

Two views of the Web-based Utility are available. Click basic to view basic settings, or click advanced to view advanced settings.

When you have finished making changes on a screen, click the Submit All Changes button to save the changes, or click the Undo All Changes button to undo your changes. When changes are saved, the Phone Adapter may reboot.

24

Figure 6-1: Login Screen

Chapter 6: Using the Web-based Utility How to Access the Web-based Utility

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Phone Adapter with Router Sales@voipon.co.uk Tel +44 01245 808195 Fax +44 01245Page Word definition How to Use this GuideCopyright and Trademarks Phone Adapter with Router Table of Contents Common Problems and Solutions Frequently Asked Questions Internet Telephony Service Provider Itsp LinksysBack Panel Front Panel11 Voice User 1 Screen Introduction WelcomeWhat’s in this Guide? Introduction What’s in this Guide? Phone Adapter with Router Use of IP Addresses Networking BasicsAn Introduction to Local Area Networks Networking Basics Getting to Know the Phone Adapter Phone Adapter with Router Back PanelFront Panel Front PanelBefore You Begin Connecting the Phone AdapterGetting Started Connect to the Modem Proceed to the next section Configuring the Phone Adapter DhcpStatic IP Settings Placing the Phone Adapter Wall-Mount OptionGetting Started Overview Using the Interactive Voice Response MenuAccessing the Interactive Voice Response Menu Using the Interactive Voice Response Menu Interactive Voice Response Menu Firmware the programming code that runs a networking device Set Network or 121 Enter the network or Set the Mode 201 Press 0 to select Entering a Password Enter 1 to confirm. You will hear, OptionConfiguring the Settings for Your Internet Phone Service Using the Web-based Utility RouterHow to Access the Web-based Utility VoiceSystem Status Router TabProduct Information Packet a unit of data sent over a network PPPoE Settings Internet Connection SettingsStatic IP Settings Optional Settings MAC Clone SettingsQOS Settings Remote ManagementVlan Virtual Local Area Network Settings LAN Network Settings Static Dhcp Lease SettingsPhone Adapter with Router Port Forwarding Settings DMZ SettingsMiscellaneous Settings System Reserved Ports RangeVoice Tab Voice Info ScreenLine 1/2 Status Line 1 StatusUsing the Web-based Utility Phone Adapter with Router System Configuration Voice System ScreenVoice User 1/2 Screen Call Forward SettingsSelective Call Forward Settings Using the Web-based Utility Speed Dial Settings Supplementary Service SettingsDistinctive Ring Settings Ring SettingsPhone Adapter with Router Phone Adapter with Router Appendix a Troubleshooting Common Problems and SolutionsFor Windows 98 and Millennium Need to set a static IP address on a PCFor Windows For Windows XPWant to test my Internet connection For Windows XP Phone Adapter with Router Need to set up a server behind my Phone Adapter TCP UDP Can’t get the Internet game, server, or application to work For Microsoft Internet Explorer 5.0 or higher For Netscape 4.7 or higherFrequently Asked Questions Where is the Phone Adapter installed on the network?Can I make calls while I’m browsing the Internet? Does the Phone Adapter support IPX or AppleTalk?Does the Phone Adapter support ICQ send file? How can I block corrupted FTP downloads? Will the Phone Adapter function in a Macintosh environment?What is DMZ Hosting? How do I reset the Phone Adapter?Which modems are compatible with the Phone Adapter? How do I get mIRC to work with the Phone Adapter?Phone Adapter with Router Figure B-1 IP Configuration Screen Windows 98 or Me InstructionsWindows 2000 or XP Instructions For the Phone Adapter’s Web-based UtilityNetwork Neighborhood/My Network Places Appendix C Windows HelpShared Resources Appendix C Windows Help Appendix D Glossary Appendix D Glossary Phone Adapter with Router Phone Adapter with Router Appendix E Specifications Phone Adapter with Router Vmwi Visual Message Waiting Indicator via FSK Hook Flash Event SignalingPolarity Control Caller ID Generation Name & Number Bellcore, DTMF, EtsiPhone Adapter with Router 10 to 90% Non-condensing, operating and non-operating Phone Adapter with Router Appendix F Warranty Information Appendix F Warranty Information Appendix G Regulatory Information FCC StatementAppendix G Regulatory Information Phone Adapter with Router Phone Adapter with Router Phone Adapter with Router Phone Adapter with Router Phone Adapter with Router Phone Adapter with Router Internet Telephony Service Provider Itsp Appendix H Contact InformationLinksys For support, contact your ItspAppendix H Contact Information
Related manuals
Manual 2 pages 37.62 Kb Manual 250 pages 30.56 Kb Manual 5 pages 43.58 Kb

SPA2102 specifications

The Cisco Systems SPA2102 is a versatile Voice over Internet Protocol (VoIP) adapter that serves as a bridge between traditional telephony systems and modern IP networks. Designed primarily for small to medium businesses, the SPA2102 is highly regarded for its reliability, ease of use, and rich feature set. This device allows users to make and receive phone calls over the internet while maintaining the ability to connect traditional analog phones.

One of the standout features of the SPA2102 is its dual-port capability. The device includes two FXS ports, allowing users to connect two separate analog telephones. This makes it an ideal choice for businesses that want to retain their existing telephony infrastructure while transitioning to a VoIP system. The ability to utilize two telephone lines simultaneously provides flexibility and convenience, especially for users in a busy office environment.

The SPA2102 leverages Session Initiation Protocol (SIP) technology, which is widely recognized for its robustness and interoperability. The support for SIP ensures that the SPA2102 can work seamlessly with various VoIP service providers, offering users a broad range of options for their telecommunication needs. In addition to SIP, the device supports various codecs, including G.711, G.726, and G.729, allowing for flexible audio quality settings and bandwidth management.

Security is also a critical aspect of the SPA2102. It incorporates advanced encryption methods, such as Secure Real-time Transport Protocol (SRTP) and Transport Layer Security (TLS), to protect voice communications from potential eavesdropping. This focus on security makes the SPA2102 a reliable choice for businesses concerned about the confidentiality of their conversations.

The device is easy to configure and manage, thanks to its web-based interface. This allows administrators to quickly set up the adapter, manage network settings, and troubleshoot any issues that may arise. Furthermore, the SPA2102 supports Quality of Service (QoS) features, ensuring that voice traffic is prioritized over other types of network traffic, which enhances call quality and reliability.

Overall, the Cisco SPA2102 is a powerful, user-friendly VoIP adapter that combines traditional telephony with modern IP technology. Its dual-port capability, support for SIP, extensive security features, and ease of configuration make it a solid choice for businesses looking to innovate their communication systems while minimizing disruption. Whether used in a small office or a larger organizational setting, the SPA2102 continues to be a reliable component of VoIP solutions.
Top Page Image Contents