Cisco Systems WS-SVC-CMM Port FXS Port Adapter, Ad-Hoc Conferencing and Transcoding Port Adapter

Page 5

Front Panel Descriptions

24-Port FXS Port Adapter

The front panel features of the 24-port FXS port adapter are as follows:

•Receive port LEDs—The LEDs on the front panel indicate the status of each FXS interface. Table 4 describes the receive port LED operation.

 

 

• RJ-21connector—See the “RJ-21 Port Connector and Cabling Specifications” section on page 26

 

 

 

for details.

 

 

 

 

 

Warning

If the symbol of suitability with an overlaid cross appears above a port, you must not connect the

 

 

 

port to a public network that follows the European Union standards. Connecting the port to this type

 

 

 

of public network can cause severe personal injury or can damage the unit. Statement 1031

 

 

 

 

 

 

 

 

 

Figure 3 shows the front panel of the 24-port FXS port adapter.

Figure 3 24-Port FXS Port Adapter Front Panel Features

Receive port LEDs

WS-SVC-CMM-24FXS

FXS Interface Board Adapter

98289

RJ-21 connector

Table 4 24-Port FXS Port Adapter Receive Port LEDs

Color

Green

Off

Description

Port is off-hook or ringing.

Port is not active (connected device on-hook) or is disabled through the CLI.

Ad-Hoc Conferencing and Transcoding Port Adapter

The front panel features of the ad-hoc conferencing and transcoding port adapter are shown in Figure 4, and the STATUS LED is described in Table 5.

Catalyst 6500 Series Switch and Cisco 7600 Series Router CMM Installation and Verification Note

 

78-14107-07

5

 

 

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Product Number WS-SVC-CMM Front Panel Descriptions ContentsColor Description Port T1 and E1 Port Adapters RJ-45 Port Connector and Cabling Specifications section onAd-Hoc Conferencing and Transcoding Port Adapter Port FXS Port AdapterHardware Requirements RequirementsSoftware Requirements Safety OverviewPage Required Tools Installing and Removing the CMMInstalling the CMM Horizontal slots Positioning the Module in a Horizontal Slot Chassis Clearing the EMI Gasket in a Horizontal Slot Chassis Vertical slots Positioning the Module in a Vertical Slot Chassis Clearing the EMI Gasket in a Vertical Slot Chassis Status Active Next Removing the CMMHorizontal slots Removing a Port Adapter from CMM Slots 1 through Removing and Replacing Port AdaptersCMM Bottom View CMM Top View with Port Adapters Installed Installing a Port Adapter in CMM Slots 1 through Removing and Replacing Port Adapters Removing and Replacing Port Adapters RJ-45 Port Connector and Cabling Specifications Verifying the InstallationPin1 Description RJ-21 Telco Interface 90-Degree Cable Connector RJ-21 Port Connector and Cabling SpecificationsAccessing the Port Adapter Ports Configuring the Port Adapter Clock Source Configuring the Port Adapter PortsDisaster Recovery for CMM Software Upgrades Disaster Recovery for Supervisor Engine Related Documentation Regulatory Standards ComplianceCisco.com Obtaining DocumentationDocumentation DVD Ordering DocumentationCisco Product Security Overview Reporting Security Problems in Cisco ProductsDocumentation Feedback Cisco Technical Support Website Submitting a Service RequestObtaining Technical Assistance Obtaining Additional Publications and Information Definitions of Service Request SeverityObtaining Additional Publications and Information

WS-SVC-CMM specifications

Cisco Systems WS-SVC-CMM, also known as the Cisco Services Control Module, is a high-performance network appliance designed to enhance the capabilities of Cisco routers and integrate a variety of advanced services into existing infrastructures. This revolutionary module caters to enterprises yearning for reliability, scalability, and performance improvements in their network environments.

One of the primary features of the WS-SVC-CMM is its remarkable ability to deliver service integration, enabling organizations to incorporate services such as firewall protection, intrusion prevention, and content filtering directly into their existing Cisco router framework. This integration streamlines operations and reduces the need for multiple devices, leading to lower total cost of ownership.

The WS-SVC-CMM supports a broad array of technologies that empower businesses to optimize their networks. With built-in Cisco Secure Services and Intelligent Network services, organizations can efficiently manage security policies and streamline operations across various network segments. This module supports Virtual Routing and Forwarding (VRF), allowing for flexible traffic management and network segmentation without compromising performance.

Moreover, its architecture is designed for scalability, ensuring that businesses can adapt as their operational needs evolve. The WS-SVC-CMM can accommodate growth seamlessly, handling increased throughput and expanded services without the need for significant hardware upgrades. High availability and redundancy are also key aspects, which means organizations can depend on constant uptime and reliability.

In addition to security and scalability, the WS-SVC-CMM boasts exceptional performance characteristics. With advanced load balancing capabilities and enhanced QoS (Quality of Service) features, this module can prioritize critical applications and manage bandwidth effectively, providing a superior user experience.

User-friendly management capabilities through Cisco's Integrated Management Framework enable network administrators to configure, monitor, and troubleshoot services conveniently. This centralized approach reduces complexity and increases agility, making it easier to respond to changes within the network.

Overall, Cisco Systems WS-SVC-CMM is a robust and versatile solution tailored for businesses looking to enhance their network functionalities. With an emphasis on seamless service integration, high availability, performance scalability, and comprehensive management, this service control module stands out as a strategic investment for enterprises committed to advancing their digital ecosystems.
Top Page Image Contents