Cisco Systems WS-SVC-CMM manual Hardware Requirements

Page 6

Requirements

Figure 4 Ad-hoc Conferencing and Transcoding Port Adapter Front Panel Features

WS-SVC-CMM-ACT

Ad-hoc Conferencing and Transcoding Port Adapter

99302

Table 5 Ad-hoc Conferencing and Transcoding Port Adapter STATUS LED

Color

Green

Red

Off

Description

Port adapter is up and operational.

Port adapter is shut down.

Port adapter is not located by the system.

Requirements

These sections describe the hardware and software requirements:

•Hardware Requirements, page 6

•Software Requirements, page 7

Hardware Requirements

The hardware requirements for the CMM are as follows:

•Catalyst 6500 series switch.

•Cisco 7600 series router.

•A Supervisor Engine 1, Supervisor Engine 2, or Supervisor Engine 720—The supervisor engine can have an MSFC, MSFC2, or MSFC3, but the CMM does not require one for configuration or operation.

•Port adapters—You can install up to three T1, E1, or FXS port adapters into slots 1 through 3 on the CMM base module.

You can install up to four ACT port adapters into the CMM base module. (The internally located slot 4 is reserved for the ACT port adapter.)

Note You cannot mix T1 port adapters with E1 port adapters, but any other combination of port adapters is supported.

•CMM module blank filler plate (WS-SVC-CMM-BLANK) for unused port adapter slots.

Catalyst 6500 Series Switch and Cisco 7600 Series Router CMM Installation and Verification Note

6

78-14107-07

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Product Number WS-SVC-CMM Contents Front Panel DescriptionsColor Description RJ-45 Port Connector and Cabling Specifications section on Port T1 and E1 Port AdaptersPort FXS Port Adapter Ad-Hoc Conferencing and Transcoding Port AdapterRequirements Hardware RequirementsSafety Overview Software RequirementsPage Installing and Removing the CMM Installing the CMMRequired Tools Horizontal slots Positioning the Module in a Horizontal Slot Chassis Clearing the EMI Gasket in a Horizontal Slot Chassis Vertical slots Positioning the Module in a Vertical Slot Chassis Clearing the EMI Gasket in a Vertical Slot Chassis Removing the CMM Status Active NextHorizontal slots Removing and Replacing Port Adapters Removing a Port Adapter from CMM Slots 1 throughCMM Bottom View CMM Top View with Port Adapters Installed Installing a Port Adapter in CMM Slots 1 through Removing and Replacing Port Adapters Removing and Replacing Port Adapters Verifying the Installation RJ-45 Port Connector and Cabling SpecificationsPin1 Description RJ-21 Port Connector and Cabling Specifications RJ-21 Telco Interface 90-Degree Cable ConnectorAccessing the Port Adapter Ports Configuring the Port Adapter Ports Configuring the Port Adapter Clock SourceDisaster Recovery for CMM Software Upgrades Disaster Recovery for Supervisor Engine Regulatory Standards Compliance Related DocumentationDocumentation DVD Obtaining DocumentationCisco.com Ordering DocumentationReporting Security Problems in Cisco Products Documentation FeedbackCisco Product Security Overview Submitting a Service Request Obtaining Technical AssistanceCisco Technical Support Website Definitions of Service Request Severity Obtaining Additional Publications and InformationObtaining Additional Publications and Information

WS-SVC-CMM specifications

Cisco Systems WS-SVC-CMM, also known as the Cisco Services Control Module, is a high-performance network appliance designed to enhance the capabilities of Cisco routers and integrate a variety of advanced services into existing infrastructures. This revolutionary module caters to enterprises yearning for reliability, scalability, and performance improvements in their network environments.

One of the primary features of the WS-SVC-CMM is its remarkable ability to deliver service integration, enabling organizations to incorporate services such as firewall protection, intrusion prevention, and content filtering directly into their existing Cisco router framework. This integration streamlines operations and reduces the need for multiple devices, leading to lower total cost of ownership.

The WS-SVC-CMM supports a broad array of technologies that empower businesses to optimize their networks. With built-in Cisco Secure Services and Intelligent Network services, organizations can efficiently manage security policies and streamline operations across various network segments. This module supports Virtual Routing and Forwarding (VRF), allowing for flexible traffic management and network segmentation without compromising performance.

Moreover, its architecture is designed for scalability, ensuring that businesses can adapt as their operational needs evolve. The WS-SVC-CMM can accommodate growth seamlessly, handling increased throughput and expanded services without the need for significant hardware upgrades. High availability and redundancy are also key aspects, which means organizations can depend on constant uptime and reliability.

In addition to security and scalability, the WS-SVC-CMM boasts exceptional performance characteristics. With advanced load balancing capabilities and enhanced QoS (Quality of Service) features, this module can prioritize critical applications and manage bandwidth effectively, providing a superior user experience.

User-friendly management capabilities through Cisco's Integrated Management Framework enable network administrators to configure, monitor, and troubleshoot services conveniently. This centralized approach reduces complexity and increases agility, making it easier to respond to changes within the network.

Overall, Cisco Systems WS-SVC-CMM is a robust and versatile solution tailored for businesses looking to enhance their network functionalities. With an emphasis on seamless service integration, high availability, performance scalability, and comprehensive management, this service control module stands out as a strategic investment for enterprises committed to advancing their digital ecosystems.
Top Page Image Contents