Cisco Systems NSS2000 Series manual Log into the NSS Configuration Interface, Subnet Mast Netmask

Page 14

Configuring the Network Storage System (NSS)

3

 

Step 2 — Log into the NSS Configuration Interface

 

 

 

 

 

To set up your computer to communicate with the NSS:

STEP 1 Set your computer’s network settings to the following:

•IP Address: 169.254.x.y (where x and y can be any number between 1 and 254). For example, 169.254.1.2.

•Subnet Mast (Netmask): 255.255.0.0.

After you configure your computer, you can log into the NSS configuration interface. You can configure the NSS network IP settings as required.

Step 2 — Log into the NSS Configuration Interface

To log into the configuration interface:

STEP 1 If you are logging into the NSS for the first time, write down the MAC address located on the sticker attached to the bottom of the chassis. You need the MAC address as this is part of the default hostname. Otherwise, skip this step.

STEP 2 There are a variety of ways to display the NSS Login window.

•Open the Web browser on your computer: In the Address field, enter http://NAS<MAC address (For example, “http://NAS0018F804E44C”.)

•Find the NSS through UPnP or Bonjour if installed.

NSS2000 Getting Started Guide

10

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Getting Started Guide Cisco Systems, Inc. All rights reserved OL-17953-01 Contents Introduction Appendix D Contacts Introduction BenefitsRecommended Installation Sequence About this GuideSetting up the Hardware Install the Disk Drives Approved Vendor List for Drives Install the Ethernet Link Install the Power NSS-supported UPS Product FamiliesConfiguring the Network Storage System NSS Configuring the Network Storage System NSS Log into the NSS Configuration Interface Subnet Mast NetmaskConfiguring the Network Storage System NSS Configuring the Network Storage System NSS Use the Quick Setup Wizards to Configure the NSS Save the Current Configuration Configuration Manager page appears Click Unmount Windows Users Accessing the NSS Storage using CIFS/SMB Logging into a ShareWindows Users Accessing the NSS Storage through FTP Instructing your End UsersUNIX/Linux Users Accessing Storage through NFS UNIX/Linux Users Accessing Storage through FTP Mac Users Accessing Storage through CIFS/SMB From the Finder’s Go menu, click Connect to ServerMac Users Accessing Storage through FTP Power LED/Button Front Panel LEDs & ButtonsSystem LED Front Panel LEDs & ButtonsReset Button Front Panel LAN LED Front PanelHard Disk Drive LEDs Front Panel USB LED Front PanelUPS LED Back Panel Environmental Specifications Regulatory Compliance and Safety Information Warranty End User License Agreement EulaContacts

NSS2000 Series specifications

The Cisco Systems NSS2000 Series represents a significant innovation in network storage solutions, combining advanced technology with user-friendly design to meet the needs of small to medium-sized businesses. This product line is primarily aimed at organizations seeking reliable, flexible, and scalable storage solutions that facilitate efficient data management while ensuring data security.

One of the standout features of the NSS2000 Series is its robust hardware configuration, which typically includes multiple SATA hard drive bays. This allows users to install several hard drives, increasing storage capacity and redundancy through RAID configurations. The NSS2000 supports various RAID levels, providing options for data protection that can be tailored to specific business requirements.

In terms of connectivity, the NSS2000 is equipped with dual gigabit Ethernet ports, enhancing data transfer speeds and ensuring network reliability through link aggregation capabilities. This feature allows for increased bandwidth and fault tolerance, crucial for environments with high data demand.

The NSS2000 Series is built on a Linux-based operating system, ensuring stability and efficiency. This operating system supports a variety of protocols, including CIFS/SMB for Windows users, AFP for Macintosh environments, and NFS for Unix and Linux clients. This multi-protocol support facilitates seamless integration into mixed operating system environments, making it a versatile solution for diverse organizational needs.

Moreover, the NSS2000’s intuitive web-based management interface simplifies the administrative process. IT administrators can easily configure settings, monitor performance, and manage user access from any device with internet connectivity. This ease of management is a significant advantage for businesses without dedicated IT resources.

The built-in support for remote access features allows users to access their data securely from anywhere, further enhancing the flexibility offered by the NSS2000 Series. Additionally, the device includes support for automatic data backup solutions, ensuring that critical business information is regularly protected against data loss.

In conclusion, the Cisco Systems NSS2000 Series offers an effective solution for businesses looking to implement a reliable and efficient network storage system. Its extensive features, including scalability, robust connectivity, multi-protocol support, and user-friendly management, position it as a top choice in the small and medium-sized business market. With a focus on data security and operational efficiency, the NSS2000 stands out as a smart investment for organizations aiming to enhance their data storage capabilities.
Top Page Image Contents