Cisco Systems NSS2000 Series manual Reset Button Front Panel, LAN LED Front Panel

Page 29

LEDs & Buttons

Reset Button (Front Panel)

A

Reset Button (Front Panel)

The Reset button lets you restore the network setting system defaults or reset the box.

To restore the network setting system defaults: You need to do this if the configuration interface becomes inaccessible. To reset the network setting system defaults, shut down the NSS, hold down the Reset button, and then power up the NSS. When you see the Power LED blink yellow rapidly, release the Reset button. The network settings are restored to factory defaults.

To reset the box: Press and hold the Reset button while the system is running until the Power LED begins to blink green. Release the Reset button.

LAN LED (Front Panel)

The LEDs on the front panel indicate the status of the LAN link:

Solid Green: The LAN link is up and running at 1000 link speed, but is currently idle.

Flickering Green: The LAN link is up and running at 1000 link speed and is currently active. The LED flickers off with activity.

Solid Yellow: The LAN link is up and running at 10/100 link speed, but is currently idle.

Flickering Yellow: The LAN link is up and running at 10/100 link speed and is currently active. The LED flickers off with activity.

Off: No LAN link is detected.

NSS2000 Getting Started Guide

25

Image 29
Contents Getting Started Guide Cisco Systems, Inc. All rights reserved OL-17953-01 Contents Introduction Appendix D Contacts Benefits IntroductionAbout this Guide Recommended Installation SequenceSetting up the Hardware Install the Disk Drives Approved Vendor List for Drives Install the Ethernet Link NSS-supported UPS Product Families Install the PowerConfiguring the Network Storage System NSS Configuring the Network Storage System NSS Subnet Mast Netmask Log into the NSS Configuration InterfaceConfiguring the Network Storage System NSS Configuring the Network Storage System NSS Use the Quick Setup Wizards to Configure the NSS Save the Current Configuration Configuration Manager page appears Click Unmount Logging into a Share Windows Users Accessing the NSS Storage using CIFS/SMBInstructing your End Users Windows Users Accessing the NSS Storage through FTPUNIX/Linux Users Accessing Storage through NFS UNIX/Linux Users Accessing Storage through FTP From the Finder’s Go menu, click Connect to Server Mac Users Accessing Storage through CIFS/SMBMac Users Accessing Storage through FTP LEDs & Buttons Power LED/Button Front PanelLEDs & Buttons System LED Front PanelLAN LED Front Panel Reset Button Front PanelUSB LED Front Panel Hard Disk Drive LEDs Front PanelUPS LED Back Panel Environmental Specifications Warranty End User License Agreement Eula Regulatory Compliance and Safety InformationContacts

NSS2000 Series specifications

The Cisco Systems NSS2000 Series represents a significant innovation in network storage solutions, combining advanced technology with user-friendly design to meet the needs of small to medium-sized businesses. This product line is primarily aimed at organizations seeking reliable, flexible, and scalable storage solutions that facilitate efficient data management while ensuring data security.

One of the standout features of the NSS2000 Series is its robust hardware configuration, which typically includes multiple SATA hard drive bays. This allows users to install several hard drives, increasing storage capacity and redundancy through RAID configurations. The NSS2000 supports various RAID levels, providing options for data protection that can be tailored to specific business requirements.

In terms of connectivity, the NSS2000 is equipped with dual gigabit Ethernet ports, enhancing data transfer speeds and ensuring network reliability through link aggregation capabilities. This feature allows for increased bandwidth and fault tolerance, crucial for environments with high data demand.

The NSS2000 Series is built on a Linux-based operating system, ensuring stability and efficiency. This operating system supports a variety of protocols, including CIFS/SMB for Windows users, AFP for Macintosh environments, and NFS for Unix and Linux clients. This multi-protocol support facilitates seamless integration into mixed operating system environments, making it a versatile solution for diverse organizational needs.

Moreover, the NSS2000’s intuitive web-based management interface simplifies the administrative process. IT administrators can easily configure settings, monitor performance, and manage user access from any device with internet connectivity. This ease of management is a significant advantage for businesses without dedicated IT resources.

The built-in support for remote access features allows users to access their data securely from anywhere, further enhancing the flexibility offered by the NSS2000 Series. Additionally, the device includes support for automatic data backup solutions, ensuring that critical business information is regularly protected against data loss.

In conclusion, the Cisco Systems NSS2000 Series offers an effective solution for businesses looking to implement a reliable and efficient network storage system. Its extensive features, including scalability, robust connectivity, multi-protocol support, and user-friendly management, position it as a top choice in the small and medium-sized business market. With a focus on data security and operational efficiency, the NSS2000 stands out as a smart investment for organizations aiming to enhance their data storage capabilities.