OC192/STM64 LR/LH 4 Port 1550 Card
Warning Read the installation instructions before you connect the system to its power source.
Warning This unit is intended for installation in restricted access areas. A restricted access area is where access can only be gained by service personnel through the use of a special tool, lock and key, or other means of security, and is controlled by the authority responsible for the location.
Warning Voltage is present on the backplane when the system is operating. To reduce risk of an electric shock, keep hands and fingers out of the power supply bays and backplane areas.
Warning Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do not stare into the beam or view directly with optical instruments. Viewing the laser output with certain optical instruments (for example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye hazard. Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
OC192/STM64 LR/LH 4 Port 1550 Card
OC192/STM64 LR/LH 4 Port 1550 Card Features and Functions
The OC192/STM64 LR/LH 4 port 1550 card provides four
OC192/STM64 LR/LH 4 Port 1550 Slots and Connectors
You can install OC192/STM64 LR/LH 4 port 1550 cards in slots 1 through 4 and 11 through 14. The card provides four bidirectional OGI type connector adapters on the faceplate (angled downward), carrying two fiber strands (1 transmit and 1 receive). Only one transmit and receive pair is used per connector adapter. On a breakout cable, use port three, fiber 4 (transmit) and fiber 3 (receive).
OC192/STM64 LR/LH 4 Port 1550 Performance Monitoring Thresholds
Table 1 shows PM thresholds that apply to the OC192/STM64 LR/LH card.
Installing the Cisco ONS 15600 OC192/STM64 LR/LH 4 Port 1550 Card
2 |
| |
|