Install the eTrust Agent for Cisco NAC | Cisco Systems G01028-1E

Install the eTrust Agent for Cisco NAC

Install the eTrust Agent for Cisco NAC on all end-point devices, such as desktop computers, workstations, laptops, and servers that connect to or use network resources.

To install the eTrust Agent for Cisco NAC on an end-point device, follow these steps:

1.From the directory you downloaded the eTrust Agent for Cisco NAC, distribute CAPPInstall.exe to all end-point devices.

2.Run the following command to silently install the eTrust Agent for NAC on the end-point device:

CAPPInstall.exe -silent

The files cai-pp.dll and cai-pp.inf are installed in %CommonProgramFiles%\Cisco Systems\CiscoTrustAgent\Plugins\Install. The next time the Cisco Trust Agent runs, these files are automatically moved up one directory level to \Plugins.

Verify the Installation

Use Cisco Secure ACS to verify that the Computer Associates attributes have been installed. For instructions, refer to the Cisco document NAC User Guide for Cisco Secure ACS 3.3.

To verify the installation of the eTrust Agent for Cisco NAC on an individual end-point device, restart the device and check that the following files exist in %CommonProgramFiles%\Cisco Systems\Cisco TrustAgent\Plugins:

cai-pp.dll cai-pp.inf

For further assistance, see the Computer Associates SupportConnect website at http://supportconnect.ca.com, where you may check the Knowledge Base for additional information or contact a Customer Support representative.

Setting Up eTrust Agent for Cisco NAC 11