Cisco Systems CVR-CFP-4SFP10G, CFP-40G-SR4 manual Required Tools, Installing the CFP Transceiver

Page 12

Required Tools

Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040

Warning Use of controls, adjustments, or performing procedures other than those specified may result in hazardous radiation exposure. Statement 1057

Required Tools

You will need these tools to install the CFP transceiver module:

•Small flat-blade screwdriver for removing the CFP transceiver socket cover.

•Wrist strap or other personal grounding device to prevent electro-static discharge (ESD) occurrences.

•Fiber-optic end-face cleaning tools and inspection equipment. For complete information on inspecting and cleaning fiber-optic connections, refer to the white paper at this URL:

http://www.cisco.com/en/US/tech/tk482/tk876/technologies_white_paper09186a0080254eba.shtml

Installing the CFP Transceiver

Caution The CFP transceiver is a static-sensitive device. Always use an ESD wrist strap or similar individual grounding device when handling the CFP transceivers or coming into contact with the modules.

To install a CFP transceiver, follow these steps:

Step 1 Remove the CFP transceiver from its protective packaging.

Step 2 Check the label on the CFP transceiver body to verify that you have the correct model for your network. Step 3 Remove the dust plug from the CFP transceiver module optical port and set it aside.

Step 4 Align the CFP device into the transceiver port socket of your networking module, and slide it in until the CFP transceiver EMI gasket flange makes contact with the module faceplate. (See Figure 4.)

Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules Installation Note

12

OL-23946-01

 

 

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Contents Overview Captive installation screws 10G SFP+ ports Transceiver Description Product Number GigabitPower dBm DBm Wavelength nm Gigabit Bandwidth MHz/km GigabitCFP Transceiver Transceiver Type Transmit Safety Power dBm DBm Wavelength nmStatement 1071-Warning Definition Bewaar Deze InstructiesSäilytä Nämä Ohjeet Conservez CES InformationsBewahren SIE Diese Hinweise GUT AUF Conservare Queste IstruzioniAviso Instruções Importantes DE Segurança Guarde Estas InstruçõesGuarde Estas Instrucciones Spara Dessa AnvisningarGEM Disse Anvisninger OL-23946-01 Page Installing the CFP Transceiver Required ToolsEMI gasket flange Seating the CFP Transceiver Module in the Socket SC connector Removing the CFP Transceiver If you need to remove a CFP transceiver, follow these steps Dust plugs in the CFP transceiver optical boresTransceiver in antistatic protective packaging Translated Safety Warnings Statement 70-Invisible Laser Radiation WarningStatement 1008-Class 1 Laser Product Statement 1040-Product Disposal Translated Safety Warnings Statement 1057-Hazardous Radiation Exposure Translated Safety Warnings Obtaining Documentation and Submitting a Service Request

CFP-40G-FR CFP-100G-SR10, CFP-40G-LR4, CFP-100G-LR4, CFP-40G-SR4, CVR-CPR-4SFP10G CFP-40G-FR specifications

Cisco Systems is renowned for its robust networking products, and within its vast portfolio, the CFP family of optical transceivers plays a critical role in advancing high-speed data communications. Among the well-regarded models are CFP-40G-LR4, CFP-100G-LR4, CFP-40G-SR4, CVR-CFP-4SFP10G, CVR-CPR-4SFP10G, and CFP-40G-FR. Each of these transceivers is engineered to support various applications and networking demands, ensuring flexibility and efficiency in data transmission.

The CFP-40G-LR4 is designed for long-distance transmissions, utilizing a four-channel system to transfer data over a maximum distance of 10 kilometers. It leverages wavelength division multiplexing technology, allowing it to transmit data over a single optical fiber, which helps reduce infrastructure costs. The key feature of LR4 technology is its ability to maintain high performance across a wide range of environmental conditions.

In contrast, the CFP-100G-LR4 provides higher data rates suitable for long-reach applications. It operates over a similar distance of up to 10 kilometers but allows for 100 Gbps transmission. This capability is critical for data centers and enterprise networks where a large volume of data needs to be transmitted efficiently without compromising speed or quality.

The CFP-40G-SR4 is another important model designed for short-range applications, operating within a reach of up to 150 meters over multimode fiber. This transceiver is especially beneficial in high-density environments, such as data centers, where short-distance, high-volume connectivity is essential. Its four-channel design facilitates efficient data transfer in crowded settings.

The CVR-CFP-4SFP10G and CVR-CPR-4SFP10G are versatile adapters that enable the use of SFP+ modules in CFP ports, extending the functionality of existing network equipment. These adapters enhance scalability and provide operators with the flexibility to choose specific transceiver types based on particular networking needs.

Lastly, the CFP-40G-FR serves intermediate distance requirements, supporting data transfer over 2 kilometers using a similar technology as LR4 but optimized for applications where slightly less range is needed. This model finds its place in environments that require solid bandwidth performance without the necessity of long-distance capabilities.

In summary, the Cisco CFP series of optical transceivers exemplifies advanced technology in data communications, catering to various distances and bandwidth demands. With their unique features and capabilities, these models stand out in supporting modern networking infrastructures, enhancing overall performance and reliability.
Top Page Image Contents