Cisco Systems MEMCUE-256D= installation instructions MB Sdram Dimm

Page 3

Figure 1 NM-CUE System Board with Daughter Card

127503

1	Daughter card screws	3	NM-CUE module screws

2	Daughter card	4	256-MB SDRAM DIMM

Step 2 Locate the existing 256-MB SDRAM DIMM memory card socket on the NM-CUE. (See Figure 1.) Step 3 Make sure that both latches on the SDRAM DIMM connector are in the open position.

Step 4 Orient the SDRAM DIMM so that the polarization notch lines up with the polarization key on the connector. (See Figure 2.)

Installing the NM-CUE 256-MB SDRAM DIMM Memory Card

	78-16927-01	3

Image 3

Contents Installing the NM-CUE 256-MB Sdram Dimm Memory Card Page MB Sdram Dimm Sdram Dimm Showing Polarization Notch Cisco Product Security Overview Obtaining DocumentationReporting Security Problems in Cisco Products Obtaining Technical AssistanceCisco Technical Support Website Definitions of Service Request Severity Submitting a Service RequestObtaining Additional Publications and Information