Prerequisites
Equipment Racks Considerations
The
Before using a particular rack, check for obstructions (such as a power strip) that could impair access to the interface processors or chassis cover panel. As an alternative, you can install an equipment shelf in the rack, provided that the rack dimensions allow the router to be secured to the shelf and the overall configuration permits safe installation and access.
Figure 2 shows the chassis footprint and outer dimensions and the additional clearance required to remove or install components. All are representative of both the Cisco 7010 and Cisco 7505 chassis.
Rack Dimensions
To use the
•To mount the chassis between two posts or rails using the mounting ears, the inner clearance (the width between the inner sides of the two posts or rails) must be at least 17.72 inches (45 cm).
•The height of the chassis is 11 inches (27.94 cm) with the chassis feet attached, and 10.5 inches (26.67 cm) when the chassis feet are removed.
Figure 2 Chassis Footprint and Outer Dimensions
Chassis foot C 
14.25 in. (36.20 cm)
2 in. |
|
|
| Power supply width |
|
(5.08 cm) |
|
|
|
| |
|
| 14.60 in. to ears (37.08 cm) | |||
|
|
| |||
depth with power cord and cable |
|
|
|
|
management bracket 19.0 in. (48.26 cm) | Chassis depth 17.0in. (43.18cm) | |||
|
| |||
Chassis |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Noninterface processor end
Fan tray
Interface processor end
Interface processor width 14.55 in. (36.96 cm)
Chassis width
17.50 in. (44.45 cm)
1.25 in. (3.18 cm)
|
|
|
|
|
|
|
|
|
|
|
| 13.32 in. (33.83 cm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |||
|
|
| Power supply depth 12.00 in. (30.48 cm) | Chassis foot C |
| ||||||||
processor depth | in. (28.58 cm) |
|
|
| |||||||||
|
| ||||||||||||
Interface | 11.25 |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
H2818
Cisco 7010 and Cisco 7505