Cisco Systems Cisco 7505/7010 Chassis front, Installing the Chassis in a Four-Post, 19-Inch Rack

Page 10

Rack-Mounting the Chassis

Figure 5 Installing the Chassis in a Four-Post, 19-Inch Rack

H2919

Chassis front

Warning Install heavier equipment near the bottom of the rack to maintain a low center of gravity. A top-heavy rack could easily tip over if it is not anchored or bolted to the ﬂoor, resulting in injury.

Figure 6 Installing the Chassis in a Telco Rack

Telco rack

H2918

Chassis front

10Cisco 7010 and Cisco 7505 Rack-Mount and Cable Management Kits Installation Instructions

Image 10

Contents Doc. No Product Overview Noninterface Processor End of the Cisco 7010 ChassisPrerequisites Safety GuidelinesWorking with Electrical Equipment Tools and Equipment Lifting SafelyRack Dimensions Equipment Racks ConsiderationsGeneral Precautions VentilationRack-Mounting the Chassis Installing the Ears on the Chassis Typical 19-Inch Equipment Rack Posts and Mounting StripsInstalling the Chassis in the Rack Installing the Ears on the ChassisInstalling the Chassis in a Four-Post, 19-Inch Rack Chassis frontRack-Mounting the Chassis Installing the Cable Management Brackets Cable Management Brackets-Cisco 7010 Chassis ShownCisco Information Online Cisco Information OnlineCisco Information Online