Cisco Systems AS5400 manual T1 and E1 Dial Feature Cards Getting Help

Page 40

Chapter 3 T1 and E1 Dial Feature Cards

Getting Help

!

interface FastEthernet0 mac-address 0000.0c00.0011 ip address 15.0.0.1 255.0.0.0 no ip directed-broadcast

ip route-cache same-interface no ip route-cache

no ip mroute-cache no keepalive duplex full hold-queue 75 in

!

ip classless

ip route 223.255.254.254 255.255.255.255 Ethernet0

!

access-list

101

permit

ip any any

access-list

101

deny

igrp any any

dialer-list 1 protocol ip list 101 arp 25.0.0.1 1234.1234.1241 ARPA arp 27.0.0.1 1234.1234.1243 ARPA arp 26.0.0.1 1234.1234.1242 ARPA arp 28.0.0.1 1234.1234.1244 ARPA

!

!

line con 0 exec-timeout 0 0 transport input none line 1 54

line aux 0 transport input all line vty 0 4 password lab login

!

scheduler interval 500 end

Router#

Getting Help

For information about technical support, onsite service, and exchange and repair services, refer to the “Obtaining Technical Assistance” section on page -xiiin the “Preface.”

Where to Go Next

The remaining chapters of this guide include information on installing and troubleshooting DFCs and creating cables.

Chapter 4, “T3 Dial Feature Card.”

Chapter 5, “Universal Port Dial Feature Card.”

Chapter 6, “Troubleshooting.”

Appendix A, “Cabling Specifications.”

Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide

3-14

78-13311-01

 

 

Image 40
Contents Corporate Headquarters Customer Order Number DOC-7813311= Text Part NumberCisco AS5350 and Cisco AS5400 Universal Gateway Card Getting Help Verification Getting Help Cabling Specifications Getting HelpPage Document Organization Chapter Title DescriptionDocument Conventions Convention DescriptionPreface Document Conventions Preface Document Conventions Obtaining Documentation World Wide WebDocumentation CD-ROM Ordering DocumentationCisco.com Obtaining Technical AssistanceTechnical Assistance Center New Hardware Features Related DocumentationXiv Safety Warnings, Recommendations, and Tools Required General SafetyMaintaining Safety with Electricity Preventing Electrostatic Discharge Required Tools and EquipmentWhere to Go Next Dial Feature Card and Carrier Card Guidelines Dial Feature CardsOverview Cisco AS5350 ChassisRemoving and Installing Populated Carrier Cards Online Insertion and Removal OIR of DFCsRemoving a Populated Carrier Card Loosen the Captive Screws on the Cisco AS5350Loosen the Captive Screws on the Cisco AS5400 Installing a Populated Carrier Card Blank Filler PanelTighten the Captive Screws on the Cisco AS5350 Getting Help Page T1 and E1 Dial Feature Cards Description Specification 4-Port T1 or E1 DFCOverview Online Installation and Removal of the T1 or E1 DFCRemoving the T1 or E1 DFC Router# busyout slot-number Screw Carrier Card Remove the DFC from the Cisco AS5350 Router# show controller e1 6/0 timeslot Show chassis slot Installing the T1 or E1 DFC 11 Install the T1 or E1 DFC in the Cisco AS535012 Install the T1 or E1 DFC in the Cisco AS5400 Configuring Input Impedance for the E1 DFC ConfigurationCommand Purpose VerificationHostname Router No ip mroute-cache T1 and E1 Dial Feature Cards Getting Help T3 Dial Feature Card Online Installation and Removal OIR of the T3 DFC Removing the T3 DFCRouter# busyout slot-number 58760 Installing the T3 DFC Blank DFC CoverInstall the T3 DFC in the Cisco AS5350 12 Tighten the Captive Screws on the Cisco AS5400 Page Universal Port Dial Feature Card Online Insertion and Removal OIR of the Universal Port DFC Removing the Universal Port DFCRouter# busyout slot-number 36821 Show busyout Router# clear port Installing the Universal Port DFC Install the Universal Port DFC in the Cisco AS535036818 Troubleshooting Appendix A, Cabling Specifications SPE FirmwarePage Troubleshooting LEDsUniversal Port DFC LEDs DFC LED State DescriptionT3 DFC Activity ACT DFC OK/MAINT Mixing WAN DFCsEnvironment Monitoring Displaying Environment Status Router show environment Monitoring Mode for the T1, E1 and T3 DFCs Using the Bantam Jacks for Test Port FunctionalityDrop and Insert Mode for the CT3 DFC Troubleshooting Network Interfaces Port and 4-Port T1 or E1 DFC T1 and E1 Cable and Port PinoutsRJ-45 Pin Description RJ-45 Pin Signal Description Direction DB-15 Pin Figure A-1 RJ-45-to-DB-15 Cable AssemblyRJ-45 Pin Signal Description Direction Twinax Pin RJ-45 Pin Signal Description Direction BNC PinRJ-45 Pin Signal Description Direction RJ-45 TE Pin RJ-45 Pin Signal Description Direction RJ-45 NT Pin RJ-45 Pin Signal Description Direction RJ-45 T1 PinPort T1 or E1 DFC RJ-45 Pin Signal Description Direction BareCable Description Part Number Product Number Shell Ground SHELL/BRAID J1-21 Attaching the 8-Port Interface Cable to a Bracket Optional 35059 35060 Figure A-10 Securing the Cable Bracket to the Rack 35062 Bantam Jack Port Pinouts CT3 Cable and Port PinoutsPin Description Appendix a Cabling Specifications Bantam Jack Port Pinouts Numerics IN-2 IN-3 IN-4 IN-5 IN-6
Related manuals
Manual 88 pages 30.73 Kb Manual 6 pages 32.91 Kb

AS5400 specifications

Cisco Systems has long been a leader in the networking and telecommunications field, and its AS5800 series of routers exemplify this tradition. The AS5800, along with the AS5850, AS5350, AS5400, and AS5300, provides robust solutions for service providers and enterprise-level networking applications. Each of these models has distinct features and characteristics that cater to the evolving demands of internet traffic and data processing.

The Cisco AS5800 is designed for high-capacity routing and optimized for broadband services. It supports a wide range of services, including voice, data, and video applications, making it a versatile option for service providers looking to deliver integrated solutions. It is equipped with advanced quality of service (QoS) features that ensure bandwidth is allocated effectively, holding strong even under heavy traffic conditions.

In comparison, the AS5850 offers superior processing capabilities and is typically utilized in larger-scale implementations. This model supports high-density interfaces, allowing numerous connections without compromising performance. Its architecture includes enhanced MPLS (Multiprotocol Label Switching) support, enabling more efficient traffic management and better utilization of network resources.

The AS5350 is known for its scalability and energy efficiency, ideal for voice-over-IP (VoIP) and media gateway applications. It supports various telephony features, such as protocol interworking and transcoding, making it a preferred choice for organizations focusing on digital voice technologies. The AS5300, while slightly older, continues to be a valuable asset for less demanding networks, offering reliable performance with VoIP capabilities and basic data applications.

The AS5400 bridges the gap between high-performance routing and operational efficiency. It incorporates Cisco's proprietary technologies to ensure seamless connectivity and robust failover systems. This model is highly regarded for its security features, protecting network integrity and providing peace of mind for businesses relying on sensitive data transfer.

Overall, Cisco’s AS5800 series showcases a progressive evolution of routing capabilities with enhanced features tailored for resilience, scalability, and performance. These routers not only address the technical needs of modern networks but also strategically position organizations for future growth in an increasingly digital world. Each model, with its unique attributes, continues to support the varied demands of global communication infrastructures.