Introduction
Introduction
The Cisco AS5200 universal access server is a multifaceted data communications platform that provides all the functions of an access server, a router, modems, and terminal adapters (TAs) in a modular chassis.
With its optimization for
For information on new features and Cisco IOS commands supported by Cisco IOS Release 11.2(26) P, see the “New and Changed Information” section on page 9 and the “Related Documentation” section on page 14.
System Requirements
This section describes the system requirements for Cisco IOS Release 11.2 P:
•Memory Recommendations, page 2
•Supported Hardware, page 3
•Determining the Software Version, page 3
•Upgrading to a New Software Release, page 3
•Feature Set Tables, page 4
Memory Recommendations
Table 1 lists the memory recommendations for the Cisco AS5200.
Note Beginning with Cisco IOS Release 10.3, some software image sizes exceed 4 MB and, when compressed, exceed 2 MB. Also, some systems now require more than 1 MB of main system memory for data structure tables.
Table 1 | Memory Recommendations for the Cisco AS5200 |
| |||
|
|
|
|
|
|
|
| Software | Recommended | Recommended | Runs |
Image Name | Image | Flash Memory | DRAM Memory | From1 | |
IP |
| 8 MB | 8 MB | Flash | |
|
|
|
|
|
|
IP Plus2 |
| 8 MB | 8 MB | Flash | |
Desktop |
| 8 MB | 8 MB | Flash | |
|
|
|
|
| |
Desktop Plus | 8 MB | 8 MB | Flash | ||
|
|
|
|
|
|
Enterprise |
| 16 MB | 8 MB | Flash | |
|
|
|
|
| |
Enterprise Plus | 16 MB | 8 MB | Flash | ||
|
|
|
|
|
|
1.When a system is running from Flash memory, you cannot update the system while it is running. You must use the Flash memory load helper.
2.IP Plus for the Cisco AS5200 includes protocol translation, MMP, VPDN, V.120, RMON, Managed Modems, and IBM (if IBM is not already included).
| Release Notes for Cisco AS5200 Universal Access Servers for Cisco IOS Release 11.2 P |
2 |