Fujitsu Siemens Computers S2110 Exiting from Main Menu, Menu Field, Options, Default, Description

Page 9

M a i n M e n u

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field	Options		Default	Description


Transfer Mode:	■	Standard	[Standard]	Selects the method for moving data to/from the drive. Autotype the
	■	Fast PIO 1		drive to select the optimum transfer mode. This option cannot be
	■	Fast PIO 2		changed when Auto is selected.
	■	Fast PIO 3
	■	Fast PIO 4
	■	Multiword DMA 1
	■	Multiword DMA 2

Ultra DMA	■	Disabled	[Disabled]	Selects the method for moving data to/from the drive. Autotype the
Mode:	■	Mode 0		drive to select the optimum transfer mode. This option cannot be
	■	Mode 1		changed when Auto is selected.
	■	Mode 2
	■	Mode 3
	■	Mode 4
	■	Mode 5

Exiting from Main Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu or to move to another menu.

9

Image 9

Contents Fujitsu LifeBook S Series BIOS GuideLifeBook S Series Model S2110 F U J I T S U C O M P U T E R S Y S T E M SEntering the BIOS Setup Utility BIOS SETUP UTILITYNavigating Through the Setup Utility S Series BIOSM a i n M e n u Warning! Error message ContinueTable 1 Fields, Options and Defaults for the Main Menu MAIN MENU - SETTING STANDARD SYSTEM PARAMETERSDefault Auto Primary Master Submenu of the Main MenuA bootable DVD/CD-ROM may have either a floppy disk or hard drive format. When the bootable DVD/ CD-ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format DVD/CD-ROM is used, the DVD/CD-ROM becomes Drive A. The DVD/CD-ROM will only take drive C hard drive format if the internal hard drive is not present or is disabled. The bootable DVD/ CD-ROM can never use a C designation if a formatted internal hard drive is present since the C designa- tor is always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your application software will use the new designations Secondary Master Submenu of the Main Menu Exiting from Main Menu ADVANCED MENU - SETTING DEVICE FEATURE CONTROLS A d v a n c e d M e n u Table 4 Fields, Options and Defaults for the Advanced MenuEnabled Serial/Parallel Port Configuration Submenu of the Advanced MenuDefault Power Savings Keyboard/Mouse Features Submenu of the Advanced MenuInternal Pointing Device Auto Disabled PhoenixBIOS Setup UtilityMain Video Features Submenu of the Advanced MenuInternal Device Configurations Submenu of the Advanced Menu USB Features USB Features Submenu of the Advanced MenuThe feature is disabled Figure 9. USB Features SubmenuDisabled Miscellaneous Configurations Submenu of the Advanced MenuEvent Logging Submenu of the Advanced Menu Figure 12. Security Menu SECURITY MENU - SETTING THE SECURITY FEATURESS e c u r i t y M e n u Table 12 Fields, Options and Defaults for the Security MenuAdvanced Hard Disk Security Submenu of the Security MenuExiting from the Security Menu Owner Information Submenu of the Security MenuESC Exit EnterTable 15 Fields, Options and Defaults for the Boot Menu BOOT MENU - SELECTING THE OPERATING SYSTEM SOURCEExiting from Boot Menu The Boot Device Priority Submenu of the Boot MenuINFO MENU - DISPLAYS BASIC SYSTEM INFORMATION Table 17 Fields, Options and Defaults for the Info MenuTable 18 Fields, Options and Defaults for the Exit Menu EXIT MENU - LEAVING THE SETUP UTILITYBoot Exit Saving Changes Exit Discarding Changes Load Setup Defaults